5 years agoipsec: Remove unsupported listcards and rereadgroups commands
Tobias Brunner [Tue, 30 Sep 2014 12:51:20 +0000 (14:51 +0200)]
ipsec: Remove unsupported listcards and rereadgroups commands

5 years agoipsec: Document missing commands
Tobias Brunner [Tue, 30 Sep 2014 12:50:32 +0000 (14:50 +0200)]
ipsec: Document missing commands

5 years agoipsec: Update usage output
Tobias Brunner [Tue, 30 Sep 2014 12:49:32 +0000 (14:49 +0200)]
ipsec: Update usage output

5 years agoipsec: Remove duplicate check for internal commands
Tobias Brunner [Tue, 30 Sep 2014 12:01:25 +0000 (14:01 +0200)]
ipsec: Remove duplicate check for internal commands

5 years agoipsec: Only set PATH if it is not already set
Tobias Brunner [Tue, 30 Sep 2014 11:52:39 +0000 (13:52 +0200)]
ipsec: Only set PATH if it is not already set

The comment indicated this but it was always set anyway.  All internal
commands are called via their absolute paths, so the script only uses PATH for
the uname command, but if that is not located in one of the configured
directories the script will fail.

Also, since the internal commands are called via their absolute paths there is
no need to add the directories to PATH.

5 years agoikev1: Fix handling of UNITY_LOAD_BALANCE
Tobias Brunner [Thu, 2 Oct 2014 10:40:00 +0000 (12:40 +0200)]
ikev1: Fix handling of UNITY_LOAD_BALANCE

The re-authentication is now handled within the original IKE_SA if it has not
yet been established, so we don't want to destroy it.

5 years agoikev1: Don't queue more than one mode config or XAuth task
Tobias Brunner [Thu, 2 Oct 2014 10:28:37 +0000 (12:28 +0200)]
ikev1: Don't queue more than one mode config or XAuth task

At the time we reset an IKE_SA (e.g. when re-authenticating a not yet
established SA due to a roaming event) such tasks might already be queued
by one of the phase 1 tasks.  If the SA is initiated again another task will
get queued by the phase 1 task.  This results in e.g. multiple mode config
requests, which most gateways will have problems with.

5 years agotesting: Don't check for the actual number of SWID tags in PDP scenarios
Tobias Brunner [Tue, 7 Oct 2014 10:14:30 +0000 (12:14 +0200)]
testing: Don't check for the actual number of SWID tags in PDP scenarios

The number of SWID tags varies depending on the base image, but lets
assume the number is in the hundreds.

5 years agotesting: Make TNC scenarios agnostic to the actual Debian version
Tobias Brunner [Tue, 7 Oct 2014 10:01:05 +0000 (12:01 +0200)]
testing: Make TNC scenarios agnostic to the actual Debian version

The scenarios will work with new or old base images as long as the version
in use is included as product in the master data (src/libimcv/imv/data.sql).

5 years agotesting: Make TKM related build recipes future-proof
Tobias Brunner [Tue, 7 Oct 2014 08:47:06 +0000 (10:47 +0200)]
testing: Make TKM related build recipes future-proof

The tkm scenarios recently failed due to a segmentation fault on my host
because I had an old build of the tkm library already built in the build
directory.  Because the stamp file was not versioned the new release was
never checked out or built and charon-tkm was linked against the old
version causing a segmentation fault during key derivation.

5 years agoversion bump to 5.2.1rc1
Andreas Steffen [Mon, 6 Oct 2014 21:14:13 +0000 (23:14 +0200)]
version bump to 5.2.1rc1

5 years agoMerge branch 'ext-auth' 5.2.1dr1
Martin Willi [Mon, 6 Oct 2014 16:31:14 +0000 (18:31 +0200)]
Merge branch 'ext-auth'

Integrates the ext-auth plugin by Vyronas Tsingaras. The new child process
abstraction simplifies implementation in both the new ext-auth and the existing
updown plugin, and makes them available on the Windows platform.

5 years agoNEWS: Mention new ext-auth plugin
Martin Willi [Mon, 6 Oct 2014 10:35:33 +0000 (12:35 +0200)]
NEWS: Mention new ext-auth plugin

5 years agoext-auth: Add an ext-auth plugin invoking an external authorization script
Martin Willi [Mon, 6 Oct 2014 09:52:49 +0000 (11:52 +0200)]
ext-auth: Add an ext-auth plugin invoking an external authorization script

Original patch courtesy of Vyronas Tsingaras.

5 years agoupdown: Use process abstraction to invoke updown script
Martin Willi [Thu, 2 Oct 2014 09:48:50 +0000 (11:48 +0200)]
updown: Use process abstraction to invoke updown script

5 years agoprocess: Add a wrapper to invoke a command under the system default shell
Martin Willi [Mon, 6 Oct 2014 08:52:18 +0000 (10:52 +0200)]
process: Add a wrapper to invoke a command under the system default shell

5 years agoprocess: Port child process spawning to the Windows platform
Martin Willi [Fri, 3 Oct 2014 15:30:19 +0000 (17:30 +0200)]
process: Port child process spawning to the Windows platform

5 years agoprocess: Provide an abstraction to spawn child processes with redirected I/O
Martin Willi [Thu, 2 Oct 2014 14:17:46 +0000 (16:17 +0200)]
process: Provide an abstraction to spawn child processes with redirected I/O

5 years agotesting: Updated certificates and keys in sql scenarios
Andreas Steffen [Mon, 6 Oct 2014 07:42:58 +0000 (09:42 +0200)]
testing:  Updated certificates and keys in sql scenarios

5 years agoAdded IF-M Segmentation support to NEWS
Andreas Steffen [Sun, 5 Oct 2014 21:00:19 +0000 (23:00 +0200)]
Added IF-M Segmentation support to NEWS

5 years agoIncremental parsing fixes
Andreas Steffen [Sun, 5 Oct 2014 20:52:59 +0000 (22:52 +0200)]
Incremental parsing fixes

5 years agoUpdated revoked certificate in ikev2/ocsp-revoked scenario
Andreas Steffen [Sun, 5 Oct 2014 19:33:35 +0000 (21:33 +0200)]
Updated revoked certificate in ikev2/ocsp-revoked scenario

5 years agoThe critical-extension scenarios need the old private keys
Andreas Steffen [Sun, 5 Oct 2014 18:58:03 +0000 (20:58 +0200)]
The critical-extension scenarios need the old private keys

5 years agoAdded add_segment() method to TCG/PTS attributes
Andreas Steffen [Sun, 5 Oct 2014 17:43:27 +0000 (19:43 +0200)]
Added add_segment() method to TCG/PTS attributes

5 years agoAdded add_segment() method to TCG/SEG attributes
Andreas Steffen [Sun, 5 Oct 2014 17:14:38 +0000 (19:14 +0200)]
Added add_segment() method to TCG/SEG attributes

5 years agoOS IMV proposes IF-M segmentation contract
Andreas Steffen [Sun, 5 Oct 2014 16:40:24 +0000 (18:40 +0200)]
OS IMV proposes IF-M segmentation contract

The OS IMV sends a TCG IF-M Segmentation contract request.
All IETF standard attributes support segmentation. Additionally
the IETF Installed Packages standard attributes supports
incremental processing while segments are received.

5 years agoSWID IMC proposes IF-M segmentation contracts
Andreas Steffen [Sun, 5 Oct 2014 10:54:43 +0000 (12:54 +0200)]
SWID IMC proposes IF-M segmentation contracts

5 years agounit-tests: Updated libimcv test suite
Andreas Steffen [Fri, 3 Oct 2014 20:19:22 +0000 (22:19 +0200)]
unit-tests: Updated libimcv test suite

5 years agoAdded add_segment() method to IETF attributes
Andreas Steffen [Fri, 3 Oct 2014 20:17:47 +0000 (22:17 +0200)]
Added add_segment() method to IETF attributes

5 years agoAdded add_segment() method to ITA attributes
Andreas Steffen [Fri, 3 Oct 2014 19:03:23 +0000 (21:03 +0200)]
Added add_segment() method to ITA attributes

5 years agoImplemented incremental processing of SWID tag [ID] inventory attribute
Andreas Steffen [Thu, 2 Oct 2014 19:32:36 +0000 (21:32 +0200)]
Implemented incremental processing of SWID tag [ID] inventory attribute

5 years agoImplemented add_segment method for PA-TNC attributes
Andreas Steffen [Wed, 1 Oct 2014 21:11:30 +0000 (23:11 +0200)]
Implemented add_segment method for PA-TNC attributes

5 years agoAdded total length parameter in PA-TNC attribute constructor
Andreas Steffen [Fri, 26 Sep 2014 11:24:33 +0000 (13:24 +0200)]
Added total length parameter in PA-TNC attribute constructor

5 years agoAssignment of flags starts with bit 0
Andreas Steffen [Mon, 1 Sep 2014 05:37:10 +0000 (07:37 +0200)]
Assignment of flags starts with bit 0

5 years agoRegister the reception of the AIK attribute
Andreas Steffen [Sat, 30 Aug 2014 11:33:59 +0000 (13:33 +0200)]
Register the reception of the AIK attribute

5 years agoUnit tests for libimcv
Andreas Steffen [Sat, 30 Aug 2014 10:58:09 +0000 (12:58 +0200)]
Unit tests for libimcv

5 years agoCompacted chunk creation in ita_attr_command constructor
Andreas Steffen [Sat, 30 Aug 2014 10:35:08 +0000 (12:35 +0200)]
Compacted chunk creation in ita_attr_command constructor

5 years agoMerged libpts into libimcv
Andreas Steffen [Fri, 29 Aug 2014 10:18:21 +0000 (12:18 +0200)]
Merged libpts into libimcv

5 years agoAdded out message queue for imv_msg receive method
Andreas Steffen [Fri, 29 Aug 2014 04:23:16 +0000 (06:23 +0200)]
Added out message queue for imv_msg receive method

5 years agoImplemented IF-M segmentation
Andreas Steffen [Thu, 28 Aug 2014 19:14:13 +0000 (21:14 +0200)]
Implemented IF-M segmentation

5 years agoAdded request variable to get_info_string method
Andreas Steffen [Tue, 19 Aug 2014 05:42:40 +0000 (07:42 +0200)]
Added request variable to get_info_string method

5 years agoImplemented IF-M segmentation contracts
Andreas Steffen [Tue, 5 Aug 2014 16:36:03 +0000 (18:36 +0200)]
Implemented IF-M segmentation contracts

5 years agoAllow to treat specified Attribute-Type-Not-Supported errors as non-fatal
Andreas Steffen [Thu, 17 Jul 2014 13:16:38 +0000 (15:16 +0200)]
Allow to treat specified Attribute-Type-Not-Supported errors as non-fatal

5 years agotesting: Updated swanctl certificates and keys
Tobias Brunner [Fri, 3 Oct 2014 10:32:23 +0000 (12:32 +0200)]
testing: Updated swanctl certificates and keys

5 years agotesting: Wait a bit in swanctl scenarios before interacting with the daemon
Tobias Brunner [Fri, 3 Oct 2014 10:20:37 +0000 (12:20 +0200)]
testing: Wait a bit in swanctl scenarios before interacting with the daemon

5 years agotesting: Actually build swanctl
Tobias Brunner [Fri, 3 Oct 2014 10:16:03 +0000 (12:16 +0200)]
testing: Actually build swanctl

5 years agotesting: Make sure the whitelist plugin is ready before configuring it
Tobias Brunner [Fri, 3 Oct 2014 10:04:53 +0000 (12:04 +0200)]
testing: Make sure the whitelist plugin is ready before configuring it

5 years agotesting: Update PKCS#12 containers
Tobias Brunner [Fri, 3 Oct 2014 10:04:32 +0000 (12:04 +0200)]
testing: Update PKCS#12 containers

5 years agotesting: Update PKCS#8 keys
Tobias Brunner [Fri, 3 Oct 2014 09:53:35 +0000 (11:53 +0200)]
testing: Update PKCS#8 keys

5 years agotesting: Update public keys in DNSSEC scenarios
Tobias Brunner [Fri, 3 Oct 2014 09:34:49 +0000 (11:34 +0200)]
testing: Update public keys in DNSSEC scenarios

The tests are successful even if the public keys are not stored locally,
but an additional DNS query is required to fetch them.

5 years agotesting: Update public keys and certificates in DNS zone
Tobias Brunner [Fri, 3 Oct 2014 09:30:57 +0000 (11:30 +0200)]
testing: Update public keys and certificates in DNS zone

5 years agotesting: Update carols certificate in several test cases
Tobias Brunner [Fri, 3 Oct 2014 09:22:11 +0000 (11:22 +0200)]
testing: Update carols certificate in several test cases

5 years agotesting: Add some notes about how to reissue attribute certificates
Martin Willi [Fri, 3 Oct 2014 10:31:01 +0000 (12:31 +0200)]
testing: Add some notes about how to reissue attribute certificates

5 years agotesting: Reissue attribute certificates for the new holder certificates
Martin Willi [Fri, 3 Oct 2014 10:26:56 +0000 (12:26 +0200)]
testing: Reissue attribute certificates for the new holder certificates

Due to the expired and reissued holder certificates of carol and dave, new
attribute certificates are required to match the holder certificates serial in
the ikev2/acert-{cached,fallback,inline} tests.

5 years agostarter: Allow specifying the ipsec.conf location in strongswan.conf
Shea Levy [Tue, 30 Sep 2014 19:14:47 +0000 (15:14 -0400)]
starter: Allow specifying the ipsec.conf location in strongswan.conf

5 years agostroke: Allow specifying the ipsec.secrets location in strongswan.conf
Shea Levy [Tue, 30 Sep 2014 19:11:03 +0000 (15:11 -0400)]
stroke: Allow specifying the ipsec.secrets location in strongswan.conf

5 years agolibrary: Allow specifying the path to strongswan.conf in the STRONGSWAN_CONF env var
Shea Levy [Tue, 30 Sep 2014 18:31:50 +0000 (14:31 -0400)]
library: Allow specifying the path to strongswan.conf in the STRONGSWAN_CONF env var

5 years agoDon't fail to install if sysconfdir isn't writable
Shea Levy [Fri, 19 Sep 2014 18:32:22 +0000 (14:32 -0400)]
Don't fail to install if sysconfdir isn't writable

5 years agoikev1: Be more verbose if a peer config would match, but is unusable for Mode
Martin Willi [Thu, 25 Sep 2014 15:09:53 +0000 (17:09 +0200)]
ikev1: Be more verbose if a peer config would match, but is unusable for Mode

5 years agoikev2: Reorder task activation for established IKE SAs
Tobias Brunner [Fri, 19 Sep 2014 11:44:16 +0000 (13:44 +0200)]
ikev2: Reorder task activation for established IKE SAs

We now prefer MOBIKE tasks over delete tasks then the rest.

5 years agoRevert "ikev2: Insert MOBIKE tasks at the front of the queue"
Tobias Brunner [Fri, 19 Sep 2014 11:40:14 +0000 (13:40 +0200)]
Revert "ikev2: Insert MOBIKE tasks at the front of the queue"

This reverts commit 3293d146289d7c05e6c6089ae1f7cdbcea378e63.

The position of tasks in the queue does not actually determine the order
in which they are activated.  Instead this is determined by the
statements in task_manager_v2_t.initiate().

5 years agoMerge branch 'curl-features'
Martin Willi [Wed, 24 Sep 2014 15:37:13 +0000 (17:37 +0200)]
Merge branch 'curl-features'

Enable missing https:// support in the curl plugin by initializing libcurl

To initialize the SSL backend properly as required, we rely on our specific
crypto backends (openssl, gcrypt) that already provide this functionality.

Fixes #692.

5 years agotravis: Disable soup in "all" test
Martin Willi [Wed, 24 Sep 2014 13:53:46 +0000 (15:53 +0200)]
travis: Disable soup in "all" test

On Ubuntu 12.04, there seems to be a resource leak related to pthread keys
when initializing glib or related libraries more than once. With our repeated
initialization for libstrongswan tests, we hit the following error:

  Lib (gthread-posix.c): Unexpected error from C library during
  'pthread_key_create': Resource temporarily unavailable.

The problem is not reproducible on a newer Gnome stack, hence we disable the
glib based soup plugin until we have a more recent Ubuntu on Travis.

5 years agocurl: For SSL features, depend on thread-safety provided by our crypto plugins
Martin Willi [Wed, 24 Sep 2014 11:13:19 +0000 (13:13 +0200)]
curl: For SSL features, depend on thread-safety provided by our crypto plugins

To use SSL in curl, we need to initialize the SSL library in a thread-safe
manner and provide the appropriate callbacks. As we already do that in our
crypto plugins using these libraries, we depend on these features.

This implies that we need the same plugin enabled (openssl, gcrypt) as the
curl backend is configured to use to fetch from HTTPS URIs.

5 years agoconfigure: Load fetcher plugins after crypto base plugins
Martin Willi [Wed, 24 Sep 2014 10:24:13 +0000 (12:24 +0200)]
configure: Load fetcher plugins after crypto base plugins

Some fetcher plugins (such as curl) might build upon OpenSSL to implement
HTTPS fetching. As we set (and can't unset) threading callbacks in our
openssl plugin, we must ensure that OpenSSL functions don't get called after
openssl plugin unloading.

We achieve that by loading curl and all other fetcher plugins after the base
crypto plugins, including openssl.

5 years agocurl: Dynamically query supported protocols and register appropriate features
Martin Willi [Thu, 28 Aug 2014 09:11:12 +0000 (11:11 +0200)]
curl: Dynamically query supported protocols and register appropriate features

5 years agoleak-detective: Whitelist libssl SSL_COMP_get_compression_methods()
Martin Willi [Thu, 28 Aug 2014 09:10:21 +0000 (11:10 +0200)]
leak-detective: Whitelist libssl SSL_COMP_get_compression_methods()

This function is called by libcurl initialization with SSL, and uses
a static allocation of compression algorithms not freed.

5 years agocurl: Try to initialize with SSL support to handle https:// URIs
Martin Willi [Thu, 28 Aug 2014 09:09:26 +0000 (11:09 +0200)]
curl: Try to initialize with SSL support to handle https:// URIs

If initialization fails, we fall back to the old behavior.

5 years agoNEWS: Introduce charon-systemd
Martin Willi [Wed, 24 Sep 2014 09:35:03 +0000 (11:35 +0200)]
NEWS: Introduce charon-systemd

5 years agoMerge branch 'netlink-cleanups'
Martin Willi [Wed, 24 Sep 2014 09:20:53 +0000 (11:20 +0200)]
Merge branch 'netlink-cleanups'

In preparation for larger parallelization changes in kernel-netlink, this
merge does some general code cleanup in that plugin.

5 years agowatcher: Add a method to query the watcher state
Martin Willi [Thu, 10 Jul 2014 14:27:18 +0000 (16:27 +0200)]
watcher: Add a method to query the watcher state

This allows a user to check if the watcher is actually running, and potentially
perform read operations directly instead of relying on watcher.

5 years agokernel-netlink: Define and use rtnetlink message types
Martin Willi [Thu, 10 Jul 2014 16:01:21 +0000 (18:01 +0200)]
kernel-netlink: Define and use rtnetlink message types

5 years agokernel-netlink: Pass protocol specific enum names to socket constructor
Martin Willi [Thu, 10 Jul 2014 12:21:20 +0000 (14:21 +0200)]
kernel-netlink: Pass protocol specific enum names to socket constructor

This avoid the hard dependency on enum names, and makes kernel_netlink_shared
independent of kernel_netlink_ipsec.

5 years agokernel-netlink: Clean up socket initialization, handle 0 as valid socket fd
Martin Willi [Wed, 9 Jul 2014 14:47:06 +0000 (16:47 +0200)]
kernel-netlink: Clean up socket initialization, handle 0 as valid socket fd

5 years agokernel-netlink: Clean up response buffer management
Martin Willi [Wed, 9 Jul 2014 14:16:16 +0000 (16:16 +0200)]
kernel-netlink: Clean up response buffer management

5 years agokernel-netlink: Use recv() instead of recvfrom()
Martin Willi [Wed, 9 Jul 2014 14:04:16 +0000 (16:04 +0200)]
kernel-netlink: Use recv() instead of recvfrom()

As we are not interested in the returned address, there is really no need
in passing that argument.

5 years agokernel-netlink: Avoid casting the NLMSG_DATA() return value
Martin Willi [Wed, 9 Jul 2014 13:53:14 +0000 (15:53 +0200)]
kernel-netlink: Avoid casting the NLMSG_DATA() return value

There is really no need for doing so, and it makes the code just unreadable.

5 years agokernel-netlink: Define netlink buffer as an union having a netlink header
Martin Willi [Wed, 9 Jul 2014 13:47:24 +0000 (15:47 +0200)]
kernel-netlink: Define netlink buffer as an union having a netlink header

This allows us to streamline the netlink buffers, and avoid extensive

5 years agoMerge branch 'systemd'
Martin Willi [Wed, 24 Sep 2014 09:17:29 +0000 (11:17 +0200)]
Merge branch 'systemd'

Introduces a systemd specific charon-systemd IKE daemon based on libcharon.
Uses systemd APIs for startup control and journal logging and a new systemd
service unit using swanctl as configuration backend.

5 years agotravis: Disable build of native systemd IKE daemon
Martin Willi [Fri, 12 Sep 2014 08:35:23 +0000 (10:35 +0200)]
travis: Disable build of native systemd IKE daemon

Travis still uses Ubuntu 12.04, where no systemd libraries are available. Skip
systemd support on Travis until we have a more recent Ubuntu distribution.

5 years agoman: Skip installation of ipsec.conf/secrets manpages when not building starter
Martin Willi [Thu, 11 Sep 2014 13:56:03 +0000 (15:56 +0200)]
man: Skip installation of ipsec.conf/secrets manpages when not building starter

5 years agoinit: Update starter systemd service to distinguish it from strongswan-swanctl
Martin Willi [Mon, 15 Sep 2014 13:52:47 +0000 (15:52 +0200)]
init: Update starter systemd service to distinguish it from strongswan-swanctl

5 years agoinit: Provide a service file for charon-systemd using swanctl
Martin Willi [Thu, 11 Sep 2014 14:23:53 +0000 (16:23 +0200)]
init: Provide a service file for charon-systemd using swanctl

5 years agosystemd: Check if ./configure detected a systemd system unit directory
Martin Willi [Mon, 15 Sep 2014 13:38:06 +0000 (15:38 +0200)]
systemd: Check if ./configure detected a systemd system unit directory

5 years agosystemd: Discover and check systemd libraries with pkg-config during configure
Martin Willi [Fri, 12 Sep 2014 08:29:29 +0000 (10:29 +0200)]
systemd: Discover and check systemd libraries with pkg-config during configure

5 years agosystemd: Add a native systemd journal logger
Martin Willi [Thu, 11 Sep 2014 15:26:34 +0000 (17:26 +0200)]
systemd: Add a native systemd journal logger

5 years agoplugin-loader: Support a reload() callback for static features
Martin Willi [Fri, 12 Sep 2014 09:07:22 +0000 (11:07 +0200)]
plugin-loader: Support a reload() callback for static features

5 years agosystemd: Provide a charon-systemd daemon targeting full systemd integration
Martin Willi [Thu, 17 Jul 2014 14:16:23 +0000 (16:16 +0200)]
systemd: Provide a charon-systemd daemon targeting full systemd integration

5 years agoswanctl: Complete --load-creds command summary
Martin Willi [Thu, 7 Aug 2014 13:23:47 +0000 (15:23 +0200)]
swanctl: Complete --load-creds command summary

5 years agoswanctl: Fix description of load-pools command summary
Martin Willi [Thu, 7 Aug 2014 13:23:27 +0000 (15:23 +0200)]
swanctl: Fix description of load-pools command summary

5 years agoswanctl: Add a --load-all command, performing --load-{creds,pools,conns}
Martin Willi [Thu, 7 Aug 2014 13:22:40 +0000 (15:22 +0200)]
swanctl: Add a --load-all command, performing --load-{creds,pools,conns}

5 years agoswanctl: Add a --reload-settings command
Martin Willi [Thu, 17 Jul 2014 16:14:34 +0000 (18:14 +0200)]
swanctl: Add a --reload-settings command

5 years agovici: Add a command to reload strongswan.conf
Martin Willi [Thu, 17 Jul 2014 16:02:09 +0000 (18:02 +0200)]
vici: Add a command to reload strongswan.conf

5 years agoencoding: Accept all exchange types for non IKEv1/IKEv2 major versions
Martin Willi [Wed, 10 Sep 2014 09:14:22 +0000 (11:14 +0200)]
encoding: Accept all exchange types for non IKEv1/IKEv2 major versions

5 years agosettings: Make loading a NULL or empty pattern a (nop-)success
Martin Willi [Mon, 25 Aug 2014 08:36:01 +0000 (10:36 +0200)]
settings: Make loading a NULL or empty pattern a (nop-)success

5 years agosettings: Use strongswan.conf used during library initialization for reload
Martin Willi [Thu, 17 Jul 2014 16:07:05 +0000 (18:07 +0200)]
settings: Use strongswan.conf used during library initialization for reload

Since 4b670a20 we require an explicit strongswan.conf to re-load configurations.
However, the define was missing in the build, breaking SIGHUP based config

Fixes #651.

5 years agolibrary: Store the used root strongswan.conf configuration
Martin Willi [Thu, 17 Jul 2014 15:47:42 +0000 (17:47 +0200)]
library: Store the used root strongswan.conf configuration

5 years agotesting: Use multiple jobs to install strongSwan
Tobias Brunner [Tue, 16 Sep 2014 12:02:05 +0000 (14:02 +0200)]
testing: Use multiple jobs to install strongSwan

5 years agotesting: Add a script to build the current (or an arbitrary) source tree
Tobias Brunner [Fri, 29 Aug 2014 10:13:49 +0000 (12:13 +0200)]
testing: Add a script to build the current (or an arbitrary) source tree

This allows to (relatively) quickly (re-)build and install the current
or an arbitrary strongSwan source tree within the root image.

bindfs is used to bind mount the source directory using the regular user
and group (only works if sudo is used to run the script) so that newly
created files are not owned by root.

As with building the root image in general the guests must not be
running while executing this script.  The guest images are automatically
rebuilt after the root image has been updated so configuration files and
other modifications in guests will be lost.

5 years agotesting: Add packages to rebuild strongSwan from the repository
Tobias Brunner [Fri, 29 Aug 2014 14:22:49 +0000 (16:22 +0200)]
testing: Add packages to rebuild strongSwan from the repository