Documented new options in strongswan.conf(5) man page

diff --git a/man/strongswan.conf.5.in b/man/strongswan.conf.5.in
index 3f4e638..2fafed6 100644 (file)
--- a/man/strongswan.conf.5.in
+++ b/man/strongswan.conf.5.in
@@ -1,4 +1,4 @@
-.TH STRONGSWAN.CONF 5 "2012-05-01" "@IPSEC_VERSION@" "strongSwan"
+.TH STRONGSWAN.CONF 5 "2013-01-25" "@IPSEC_VERSION@" "strongSwan"
 .SH NAME
 strongswan.conf \- strongSwan configuration file
 .SH DESCRIPTION
@@ -182,6 +182,10 @@ openly transmitted hash of the PSK)
 .BR charon.ignore_routing_tables
 A space-separated list of routing tables to be excluded from route lookups
 .TP
+.BR charon.ikesa_limit " [0]"
+Maximum number of IKE_SAs that can be established at the same time before new
+connection attempts are blocked
+.TP
 .BR charon.ikesa_table_segments " [1]"
 Number of exclusively locked segments in the hash table
 .TP
@@ -744,6 +748,9 @@ ENGINE ID to use in the OpenSSL plugin
 .BR libstrongswan.plugins.pkcs11.modules
 List of available PKCS#11 modules
 .TP
+.BR libstrongswan.plugins.pkcs11.load_certs " [yes]"
+Whether to load certificates from tokens
+.TP
 .BR libstrongswan.plugins.pkcs11.reload_certs " [no]"
 Reload certificates from all tokens if charon receives a SIGHUP
 .TP
@@ -827,6 +834,9 @@ URI pointing to attestation remediation instructions
 .BR libimcv.plugins.imc-os.push_info " [yes]"
 Send operating system info without being prompted
 .TP
+.BR libimcv.plugins.imv-os.database
+Database URI for the database that stores operating system information
+.TP
 .BR libimcv.plugins.imv-os.remediation_uri
 URI pointing to operating system remediation instructions
 .TP
@@ -939,6 +949,10 @@ Session timeout for mediation service
 .TP
 .BR openac.load
 Plugins to load in ipsec openac tool
+.SS pacman section
+.TP
+.BR pacman.database
+Database URI for the database that stores the package information
 .SS pki section
 .TP
 .BR pki.load
@@ -1281,6 +1295,17 @@ Never enable the load-testing plugin on productive systems. It provides
 preconfigured credentials and allows an attacker to authenticate as any user.
 .SS Options
 .TP
+.BR charon.plugins.load-tester.addrs
+Subsection that contains key/value pairs with address pools (in CIDR notation)
+to use for a specific network interface e.g. eth0 = 10.10.0.0/16
+.TP
+.BR charon.plugins.load-tester.addrs_prefix " [16]"
+Network prefix length to use when installing dynamic addresses. If set to -1 the
+full address is used (i.e. 32 or 128)
+.TP
+.BR charon.plugins.load-tester.ca_dir
+Directory to load (intermediate) CA certificates from
+.TP
 .BR charon.plugins.load-tester.child_rekey " [600]"
 Seconds to start CHILD_SA rekeying after setup
 .TP
@@ -1290,6 +1315,9 @@ Delay between initiatons for each thread
 .BR charon.plugins.load-tester.delete_after_established " [no]"
 Delete an IKE_SA as soon as it has been established
 .TP
+.BR charon.plugins.load-tester.digest " [sha1]"
+Digest algorithm used when issuing certificates
+.TP
 .BR charon.plugins.load-tester.dpd_delay " [0]"
 DPD delay to use in load test
 .TP
@@ -1311,6 +1339,9 @@ Seconds to start IKE_SA rekeying after setup
 .BR charon.plugins.load-tester.init_limit " [0]"
 Global limit of concurrently established SAs during load test
 .TP
+.BR charon.plugins.load-tester.initiator " [0.0.0.0]"
+Address to initiate from
+.TP
 .BR charon.plugins.load-tester.initiators " [0]"
 Number of concurrent initiator threads to use in load test
 .TP
@@ -1320,8 +1351,24 @@ Authentication method(s) the intiator uses
 .BR charon.plugins.load-tester.initiator_id
 Initiator ID used in load test
 .TP
+.BR charon.plugins.load-tester.initiator_match
+Initiator ID to to match against as responder
+.TP
+.BR charon.plugins.load-tester.initiator_tsi
+Traffic selector on initiator side, as proposed by initiator
+.TP
+.BR charon.plugins.load-tester.initiator_tsr
+Traffic selector on responder side, as proposed by initiator
+.TP
 .BR charon.plugins.load-tester.iterations " [1]"
-Number of IKE_SAs to initate by each initiator in load test
+Number of IKE_SAs to initiate by each initiator in load test
+.TP
+.BR charon.plugins.load-tester.issuer_cert
+Path to the issuer certificate (if not configured a hard-coded value is used)
+.TP
+.BR charon.plugins.load-tester.issuer_key
+Path to private key that is used to issue certificates (if not configured a
+hard-coded value is used)
 .TP
 .BR charon.plugins.load-tester.pool
 Provide INTERNAL_IPV4_ADDRs from a named pool
@@ -1332,7 +1379,7 @@ Preshared key to use in load test
 .BR charon.plugins.load-tester.proposal " [aes128-sha1-modp768]"
 IKE proposal to use in load test
 .TP
-.BR charon.plugins.load-tester.remote " [127.0.0.1]"
+.BR charon.plugins.load-tester.responder " [127.0.0.1]"
 Address to initiation connections to
 .TP
 .BR charon.plugins.load-tester.responder_auth " [pubkey]"
@@ -1341,11 +1388,21 @@ Authentication method(s) the responder uses
 .BR charon.plugins.load-tester.responder_id
 Responder ID used in load test
 .TP
+.BR charon.plugins.load-tester.responder_tsi " [initiator_tsi]"
+Traffic selector on initiator side, as narrowed by responder
+.TP
+.BR charon.plugins.load-tester.responder_tsr " [initiator_tsr]"
+Traffic selector on responder side, as narrowed by responder
+.TP
 .BR charon.plugins.load-tester.request_virtual_ip " [no]"
 Request an INTERNAL_IPV4_ADDR from the server
 .TP
 .BR charon.plugins.load-tester.shutdown_when_complete " [no]"
 Shutdown the daemon after all IKE_SAs have been established
+.TP
+.BR charon.plugins.load-tester.version " [0]"
+IKE version to use (0 means use IKEv2 as initiator and accept any version as
+responder)
 .SS Configuration details
 For public key authentication, the responder uses the
 .B \(dqCN=srv, OU=load-test, O=strongSwan\(dq