+++ /dev/null
-Roadwarrior <b>carol</b> proposes to gateway <b>moon</b> the cipher suite
-<b>CAMELLIA_CBC_128 / HMAC_SHA2_256 / MODP_2048</b> for the IKE protocol and
-<b>CAMELLIA_CBC_128 / HMAC_SHA2_256_128 </b> for ESP packets. A ping from <b>carol</b> to
-<b>alice</b> successfully checks the established tunnel.
+++ /dev/null
-carol::ipsec status::home.*STATE_QUICK_I2.*IPsec SA established::YES
-moon::ipsec status::rw.*STATE_QUICK_R2.*IPsec SA established::YES
-carol::ipsec statusall::IKE proposal: CAMELLIA_CBC_128/HMAC_SHA2_256/MODP_2048::YES
-moon::ipsec statusall::IKE proposal: CAMELLIA_CBC_128/HMAC_SHA2_256/MODP_2048::YES
-carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
-carol::ipsec statusall::ESP proposal: CAMELLIA_CBC_128/HMAC_SHA2_256::YES
-moon::ipsec statusall::ESP proposal: CAMELLIA_CBC_128/HMAC_SHA2_256::YES
-carol::ip xfrm state::enc cbc(camellia)::YES
-moon::ip xfrm state::enc cbc(camellia)::YES
-moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 200::YES
-moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 200::YES
+++ /dev/null
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
- plutodebug="control crypt"
- crlcheckinterval=180
- strictcrlpolicy=no
- charonstart=no
-
-conn %default
- ikelifetime=60m
- keylife=20m
- rekeymargin=3m
- keyingtries=1
- keyexchange=ikev1
- ike=camellia128-sha256-modp2048!
- esp=camellia128-sha256!
-
-conn home
- left=PH_IP_CAROL
- leftcert=carolCert.pem
- leftid=carol@strongswan.org
- right=PH_IP_MOON
- rightsubnet=10.1.0.0/16
- rightid=@moon.strongswan.org
- auto=add
+++ /dev/null
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
- load = pem pkcs1 x509 gcrypt hmac curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
- dh_exponent_ansi_x9_42 = no
-}
+++ /dev/null
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
- plutodebug="control crypt"
- crlcheckinterval=180
- strictcrlpolicy=no
- charonstart=no
-
-conn %default
- ikelifetime=60m
- keylife=20m
- rekeymargin=3m
- keyingtries=1
- keyexchange=ikev1
- ike=camellia128-sha256-modp2048!
- esp=camellia128-sha256!
-
-conn rw
- left=PH_IP_MOON
- leftcert=moonCert.pem
- leftid=@moon.strongswan.org
- leftsubnet=10.1.0.0/16
- right=%any
- rightid=carol@strongswan.org
- auto=add
+++ /dev/null
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
- load = pem pkcs1 x509 gcrypt hmac curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
- dh_exponent_ansi_x9_42 = no
-}
+++ /dev/null
-moon::ipsec stop
-carol::ipsec stop
+++ /dev/null
-moon::echo 1 > /proc/sys/net/ipv4/ip_forward
-carol::ipsec start
-moon::ipsec start
-carol::sleep 2
-carol::ipsec up home
+++ /dev/null
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon carol winnetou"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-c-w.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol"
-
-carol::ipsec status::home.*STATE_QUICK_I2.*IPsec SA established::YES
-moon::ipsec status::rw.*STATE_QUICK_R2.*IPsec SA established::YES
-carol::ipsec statusall::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512/MODP_4096::YES
-moon::ipsec statusall::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512/MODP_4096::YES
+carol::ipsec status 2> /dev/null::home.*ESTABLISHED.*carol@strongswan.org.*moon.strongswan.org::YES
+moon:: ipsec status 2> /dev/null::rw.*ESTABLISHED.*moon.strongswan.org.*carol@strongswan.org::YES
+carol::ipsec status 2> /dev/null::home.*INSTALLED, TUNNEL::YES
+moon:: ipsec status 2> /dev/null::rw.*INSTALLED, TUNNEL::YES
+carol::ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512_256::YES
+moon:: ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512_256::YES
carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
-carol::ipsec statusall::ESP proposal: SERPENT_CBC_256/HMAC_SHA2_512::YES
-moon::ipsec statusall::ESP proposal: SERPENT_CBC_256/HMAC_SHA2_512::YES
+carol::ipsec statusall 2> /dev/null::SERPENT_CBC_256/HMAC_SHA2_512_256,::YES
+moon:: ipsec statusall 2> /dev/null::SERPENT_CBC_256/HMAC_SHA2_512_256,::YES
carol::ip xfrm state::enc cbc(serpent)::YES
-moon::ip xfrm state::enc cbc(serpent)::YES
+moon:: ip xfrm state::enc cbc(serpent)::YES
moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
- plutodebug="control crypt"
- crlcheckinterval=180
- strictcrlpolicy=no
- charonstart=no
+ plutostart=no
conn %default
ikelifetime=60m
rekeymargin=3m
keyingtries=1
keyexchange=ikev1
- ike=serpent256-sha2_512-modp4096!
- esp=serpent256-sha2_512!
+ ike=serpent256-sha512-modp4096!
+ esp=serpent256-sha512!
conn home
left=PH_IP_CAROL
# /etc/strongswan.conf - strongSwan configuration file
-pluto {
- load = pem pkcs1 x509 gcrypt hmac curl kernel-netlink
+charon {
+ load = curl pem pkcs1 gcrypt x509 revocation hmac xcbc stroke kernel-netlink socket-default updown
+ send_vendor_id = yes
}
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
libstrongswan {
dh_exponent_ansi_x9_42 = no
}
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
- plutodebug="control crypt"
- crlcheckinterval=180
- strictcrlpolicy=no
- charonstart=no
+ plutostart=no
conn %default
ikelifetime=60m
rekeymargin=3m
keyingtries=1
keyexchange=ikev1
- ike=serpent256-sha2_512-modp4096!
- esp=serpent256-sha2_512!
+ ike=serpent256-sha512-modp4096!
+ esp=serpent256-sha512!
conn rw
left=PH_IP_MOON
# /etc/strongswan.conf - strongSwan configuration file
-pluto {
- load = pem pkcs1 x509 gcrypt hmac curl kernel-netlink
+charon {
+ load = curl pem pkcs1 gcrypt x509 revocation hmac xcbc stroke kernel-netlink socket-default updown
+ send_vendor_id = yes
}
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
libstrongswan {
dh_exponent_ansi_x9_42 = no
}
Roadwarrior <b>carol</b> proposes to gateway <b>moon</b> the strong cipher suite
<b>TWOFISH_CBC_256 / HMAC_SHA2_512 / MODP_4096</b> for the IKE protocol and
-<b>TWOFISH_CBC_256 / HMAC_SHA2_512_256</b> for ESP packets. A ping from <b>carol</b> to
+<b>TWOFISH_CBC_256 / HMAC_SHA2_512_256 </b> for ESP packets. A ping from <b>carol</b> to
<b>alice</b> successfully checks the established tunnel.
-carol::ipsec status::home.*STATE_QUICK_I2.*IPsec SA established::YES
-moon::ipsec status::rw.*STATE_QUICK_R2.*IPsec SA established::YES
-carol::ipsec statusall::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512/MODP_4096::YES
-moon::ipsec statusall::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512/MODP_4096::YES
+carol::ipsec status 2> /dev/null::home.*ESTABLISHED.*carol@strongswan.org.*moon.strongswan.org::YES
+moon:: ipsec status 2> /dev/null::rw.*ESTABLISHED.*moon.strongswan.org.*carol@strongswan.org::YES
+carol::ipsec status 2> /dev/null::home.*INSTALLED, TUNNEL::YES
+moon:: ipsec status 2> /dev/null::rw.*INSTALLED, TUNNEL::YES
+carol::ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512_256::YES
+moon:: ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512_256::YES
carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
-carol::ipsec statusall::ESP proposal: TWOFISH_CBC_256/HMAC_SHA2_512::YES
-moon::ipsec statusall::ESP proposal: TWOFISH_CBC_256/HMAC_SHA2_512::YES
+carol::ipsec statusall 2> /dev/null::TWOFISH_CBC_256/HMAC_SHA2_512_256,::YES
+moon:: ipsec statusall 2> /dev/null::TWOFISH_CBC_256/HMAC_SHA2_512_256,::YES
carol::ip xfrm state::enc cbc(twofish)::YES
-moon::ip xfrm state::enc cbc(twofish)::YES
+moon:: ip xfrm state::enc cbc(twofish)::YES
moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
- plutodebug="control crypt"
- crlcheckinterval=180
- strictcrlpolicy=no
- charonstart=no
+ plutostart=no
conn %default
ikelifetime=60m
rekeymargin=3m
keyingtries=1
keyexchange=ikev1
- ike=twofish256-sha2_512-modp4096!
- esp=twofish256-sha2_512!
+ ike=twofish256-sha512-modp4096!
+ esp=twofish256-sha512!
conn home
left=PH_IP_CAROL
# /etc/strongswan.conf - strongSwan configuration file
-pluto {
- load = pem pkcs1 x509 gcrypt hmac curl kernel-netlink
+charon {
+ load = curl pem pkcs1 gcrypt x509 revocation hmac xcbc stroke kernel-netlink socket-default updown
+ send_vendor_id = yes
}
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
libstrongswan {
dh_exponent_ansi_x9_42 = no
}
# /etc/ipsec.conf - strongSwan IPsec configuration file
config setup
- plutodebug="control crypt"
- crlcheckinterval=180
- strictcrlpolicy=no
- charonstart=no
-
+ plutostart=no
+
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
keyexchange=ikev1
- ike=twofish256-sha2_512-modp4096!
- esp=twofish256-sha2_512!
+ ike=twofish256-sha512-modp4096!
+ esp=twofish256-sha512!
conn rw
left=PH_IP_MOON
# /etc/strongswan.conf - strongSwan configuration file
-pluto {
- load = pem pkcs1 x509 gcrypt hmac curl kernel-netlink
+charon {
+ load = curl pem pkcs1 gcrypt x509 revocation hmac xcbc stroke kernel-netlink socket-default updown
+ send_vendor_id = yes
}
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
libstrongswan {
dh_exponent_ansi_x9_42 = no
}
moon::echo 1 > /proc/sys/net/ipv4/ip_forward
carol::ipsec start
moon::ipsec start
-carol::sleep 2
+carol::sleep 2
carol::ipsec up home
+++ /dev/null
-The roadwarrior <b>carol</b> and the gateway <b>moon</b> use the <b>gcrypt</b>
-plugin based on the <b>GNU Libgcrypt</b> library for all cryptographical functions
-whereas roadwarrior <b>dave</b> uses the default <b>strongSwan</b> cryptographical
-plugins <b>aes des sha1 sha2 md5 gmp</b>.
-<p>
-The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each
-to gateway <b>moon</b>. The authentication is based on <b>X.509 certificates</b>.
-Upon the successful establishment of the IPsec tunnels, <b>leftfirewall=yes</b>
-automatically inserts iptables-based firewall rules that let pass the tunneled traffic.
-In order to test both tunnel and firewall, both <b>carol</b> and <b>dave</b> ping
-the client <b>alice</b> behind the gateway <b>moon</b>.
-
+++ /dev/null
-moon::ipsec statusall::IPsec SA established::YES
-carol::ipsec statusall::IPsec SA established::YES
-dave::ipsec statusall::IPsec SA established::YES
-carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
-dave::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
-moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP::YES
-moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP::YES
-moon::tcpdump::IP dave.strongswan.org > moon.strongswan.org: ESP::YES
-moon::tcpdump::IP moon.strongswan.org > dave.strongswan.org: ESP::YES
-
+++ /dev/null
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
- crlcheckinterval=180
- strictcrlpolicy=no
- charonstart=no
- plutodebug=control
-
-conn %default
- ikelifetime=60m
- keylife=20m
- rekeymargin=3m
- keyingtries=1
- keyexchange=ikev1
- ike=3des-sha1-modp1536!
-
-conn home
- left=PH_IP_CAROL
- leftcert=carolCert.pem
- leftid=carol@strongswan.org
- leftfirewall=yes
- right=PH_IP_MOON
- rightid=@moon.strongswan.org
- rightsubnet=10.1.0.0/16
- auto=add
+++ /dev/null
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
- load = test-vectors pem pkcs1 x509 gcrypt hmac curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
- dh_exponent_ansi_x9_42 = no
- integrity_test = yes
- crypto_test {
- on_add = yes
- }
-}
+++ /dev/null
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
- crlcheckinterval=180
- strictcrlpolicy=no
- charonstart=no
- plutodebug=control
-
-conn %default
- ikelifetime=60m
- keylife=20m
- rekeymargin=3m
- keyingtries=1
- keyexchange=ikev1
- ike=aes256-sha256-modp2048!
-
-conn home
- left=PH_IP_DAVE
- leftcert=daveCert.pem
- leftid=dave@strongswan.org
- leftfirewall=yes
- right=PH_IP_MOON
- rightid=@moon.strongswan.org
- rightsubnet=10.1.0.0/16
- auto=add
+++ /dev/null
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
- load = test-vectors aes des sha1 sha2 md5 pem pkcs1 x509 gmp random hmac curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
- dh_exponent_ansi_x9_42 = no
- integrity_test = yes
- crypto_test {
- required = yes
- on_add = yes
- }
-}
+++ /dev/null
-# /etc/ipsec.conf - strongSwan IPsec configuration file
-
-config setup
- crlcheckinterval=180
- strictcrlpolicy=no
- charonstart=no
- plutodebug=control
-
-conn %default
- ikelifetime=60m
- keylife=20m
- rekeymargin=3m
- keyingtries=1
- keyexchange=ikev1
- ike=aes256-sha256-modp2048,3des-sha1-modp1536!
-
-conn rw
- left=PH_IP_MOON
- leftcert=moonCert.pem
- leftid=@moon.strongswan.org
- leftsubnet=10.1.0.0/16
- leftfirewall=yes
- right=%any
- auto=add
+++ /dev/null
-# /etc/strongswan.conf - strongSwan configuration file
-
-pluto {
- load = test-vectors pem pkcs1 x509 gcrypt hmac curl kernel-netlink
-}
-
-# pluto uses optimized DH exponent sizes (RFC 3526)
-
-libstrongswan {
- dh_exponent_ansi_x9_42 = no
- integrity_test = yes
- crypto_test {
- on_add = yes
- }
-}
+++ /dev/null
-moon::ipsec stop
-carol::ipsec stop
-dave::ipsec stop
-moon::/etc/init.d/iptables stop 2> /dev/null
-carol::/etc/init.d/iptables stop 2> /dev/null
-dave::/etc/init.d/iptables stop 2> /dev/null
+++ /dev/null
-moon::/etc/init.d/iptables start 2> /dev/null
-carol::/etc/init.d/iptables start 2> /dev/null
-dave::/etc/init.d/iptables start 2> /dev/null
-moon::ipsec start
-carol::ipsec start
-dave::ipsec start
-carol::sleep 1
-carol::ipsec up home
-dave::ipsec up home
+++ /dev/null
-#!/bin/bash
-#
-# This configuration file provides information on the
-# UML instances used for this test
-
-# All UML instances that are required for this test
-#
-UMLHOSTS="alice moon carol winnetou dave"
-
-# Corresponding block diagram
-#
-DIAGRAM="a-m-c-w-d.png"
-
-# UML instances on which tcpdump is to be started
-#
-TCPDUMPHOSTS="moon"
-
-# UML instances on which IPsec is started
-# Used for IPsec logging purposes
-#
-IPSECHOSTS="moon carol dave"