Maemo: Added a basic debian package for charon.
authorTobias Brunner <tobias@strongswan.org>
Thu, 14 Oct 2010 15:33:42 +0000 (17:33 +0200)
committerTobias Brunner <tobias@strongswan.org>
Thu, 14 Oct 2010 15:36:20 +0000 (17:36 +0200)
packages/strongswan-maemo/debian/changelog [new file with mode: 0644]
packages/strongswan-maemo/debian/compat [new file with mode: 0644]
packages/strongswan-maemo/debian/control [new file with mode: 0644]
packages/strongswan-maemo/debian/copyright [new file with mode: 0644]
packages/strongswan-maemo/debian/rules [new file with mode: 0755]

diff --git a/packages/strongswan-maemo/debian/changelog b/packages/strongswan-maemo/debian/changelog
new file mode 100644 (file)
index 0000000..d08a227
--- /dev/null
@@ -0,0 +1,6 @@
+strongswan (4.5.0-1) unstable; urgency=low
+
+  * Initial release
+
+ -- Tobias Brunner <tobias@strongswan.org>  Thu, 14 Oct 2010 17:31:43 +0200
+
diff --git a/packages/strongswan-maemo/debian/compat b/packages/strongswan-maemo/debian/compat
new file mode 100644 (file)
index 0000000..7ed6ff8
--- /dev/null
@@ -0,0 +1 @@
+5
diff --git a/packages/strongswan-maemo/debian/control b/packages/strongswan-maemo/debian/control
new file mode 100644 (file)
index 0000000..6b0da5e
--- /dev/null
@@ -0,0 +1,13 @@
+Source: strongswan
+Section: user/network
+Priority: extra
+Maintainer: Tobias Brunner <tobias@strongswan.org>
+Build-Depends: debhelper (>= 5), autotools-dev
+Standards-Version: 3.7.2
+
+Package: strongswan
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: strongSwan IKEv2 VPN
+ strongSwan is an IKEv2/IPsec-based VPN solution.
+
diff --git a/packages/strongswan-maemo/debian/copyright b/packages/strongswan-maemo/debian/copyright
new file mode 100644 (file)
index 0000000..615fac7
--- /dev/null
@@ -0,0 +1,8 @@
+Format-Specification: http://wiki.debian.org/Proposals/CopyrightFormat?action=recall&rev=437
+Upstream-Name: strongSwan
+Upstream-Source: http://download.strongswan.org
+Files: debian/*
+License: GPL-2
+ On Debian systems the full text of the GNU General Public License can be found
+ in the `/usr/share/common-licenses/GPL-2' file.
+
diff --git a/packages/strongswan-maemo/debian/rules b/packages/strongswan-maemo/debian/rules
new file mode 100755 (executable)
index 0000000..41482be
--- /dev/null
@@ -0,0 +1,159 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+#
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+#
+# Modified to make a template file for a multi-binary package with separated
+# build-arch and build-indep targets  by Bill Allombert 2001
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# This has to be exported to make some magic below work.
+export DH_OPTIONS
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+
+CONFIG_OPTIONS = \
+       --prefix=/usr --sysconfdir=/etc \
+       --disable-pluto --disable-tools --disable-scripts \
+       --disable-updown --disable-stroke \
+       --disable-sha1 --disable-sha2 --disable-aes --disable-des \
+       --disable-md5 --disable-gmp --disable-pgp --disable-dnskey \
+       --enable-openssl --enable-monolithic --enable-eap-identity \
+       --enable-eap-md5 --enable-eap-mschapv2 --enable-maemo
+
+CFLAGS = -Wall -g -Wno-format -Wno-pointer-sign -Wno-strict-aliasing -Wno-sign-compare -Wno-unused-parameter
+
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+       CFLAGS += -O0
+else
+       CFLAGS += -O2
+endif
+
+ifeq (,$(filter nostrip,$(DEB_BUILD_OPTIONS)))
+       INSTALL_PROGRAM += -s
+endif
+
+ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+       NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+       MAKEFLAGS += -j$(NUMJOBS)
+endif
+
+# Use hardware floating point
+ifneq (,$(findstring vfp,$(DEB_BUILD_OPTIONS)))
+       CFLAGS += -mfpu=vfp -mfloat-abi=softfp
+endif
+
+config.status: configure
+       dh_testdir
+       ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info $(CONFIG_OPTIONS) CFLAGS="$(CFLAGS)" 
+       #LDFLAGS="-Wl,-z,defs"
+
+
+#Architecture 
+build: build-arch build-indep
+
+build-arch: build-arch-stamp
+build-arch-stamp:  config.status
+
+       # Add here commands to compile the arch part of the package.
+       #$(MAKE) 
+       touch $@
+
+build-indep: build-indep-stamp
+build-indep-stamp:  config.status
+
+       # Add here commands to compile the indep part of the package.
+       #$(MAKE) doc
+       touch $@
+
+clean:
+       dh_testdir
+       dh_testroot
+       rm -f build-arch-stamp build-indep-stamp #CONFIGURE-STAMP#
+
+       # Add here commands to clean up after the build process.
+       -$(MAKE) distclean
+ifneq "$(wildcard /usr/share/misc/config.sub)" ""
+       cp -f /usr/share/misc/config.sub config.sub
+endif
+ifneq "$(wildcard /usr/share/misc/config.guess)" ""
+       cp -f /usr/share/misc/config.guess config.guess
+endif
+
+
+       dh_clean 
+
+install: install-indep install-arch
+install-indep:
+       dh_testdir
+       dh_testroot
+       dh_clean -k -i 
+       dh_installdirs -i
+
+       # Add here commands to install the indep part of the package into
+       # debian/<package>-doc.
+       #INSTALLDOC#
+
+       dh_install -i
+
+install-arch:
+       dh_testdir
+       dh_testroot
+       dh_clean -k -s 
+       dh_installdirs -s
+
+       # Add here commands to install the arch part of the package into 
+       # debian/tmp.
+       $(MAKE) DESTDIR=$(CURDIR)/debian/strongswan install
+
+       dh_install -s
+# Must not depend on anything. This is to be called by
+# binary-arch/binary-indep
+# in another 'make' thread.
+binary-common:
+       dh_testdir
+       dh_testroot
+       dh_installchangelogs NEWS
+       dh_installdocs
+       dh_installexamples
+#      dh_installmenu
+#      dh_installdebconf       
+#      dh_installlogrotate     
+#      dh_installemacsen
+#      dh_installpam
+#      dh_installmime
+#      dh_python
+#      dh_installinit
+#      dh_installcron
+#      dh_installinfo
+       dh_installman
+       dh_link
+       dh_strip
+       dh_compress 
+       dh_fixperms
+#      dh_perl
+       dh_makeshlibs
+       dh_installdeb
+       dh_shlibdeps
+       dh_gencontrol
+       dh_md5sums
+       dh_builddeb
+# Build architecture independant packages using the common target.
+binary-indep: build-indep install-indep
+       $(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
+
+# Build architecture dependant packages using the common target.
+binary-arch: build-arch install-arch
+       $(MAKE) -f debian/rules DH_OPTIONS=-s binary-common
+
+binary: binary-arch binary-indep
+.PHONY: build clean binary-indep binary-arch binary install install-indep install-arch