# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
-# RCSID $Id: testing.conf,v 1.52 2006/04/24 16:58:03 as Exp $
+# RCSID $Id$
# Root directory of testing
UMLTESTDIR=~/strongswan-testing
# Bzipped kernel sources
# (file extension .tar.bz2 required)
-KERNEL=$UMLTESTDIR/linux-2.6.16.16.tar.bz2
+KERNEL=$UMLTESTDIR/linux-2.6.24.2.tar.bz2
# Extract kernel version
KERNELVERSION=`basename $KERNEL .tar.bz2 | sed -e 's/linux-//'`
# Kernel configuration file
-KERNELCONFIG=$UMLTESTDIR/.config-2.6.16
+KERNELCONFIG=$UMLTESTDIR/.config-2.6.24
# Bzipped uml patch for kernel
# (not needed anymore for 2.6.9 kernel or higher)
-UMLPATCH=
+#UMLPATCH=$UMLTESTDIR/uml_jmpbuf-2.6.18.patch.bz2
# Bzipped source of strongSwan
-STRONGSWAN=$UMLTESTDIR/strongswan-4.0.1.tar.bz2
+STRONGSWAN=$UMLTESTDIR/strongswan-4.2.0.tar.bz2
# strongSwan compile options (use "yes" or "no")
USE_LIBCURL="yes"
USE_LDAP="yes"
+USE_EAP_AKA="yes"
+USE_P2P="yes"
+USE_LEAK_DETECTIVE="no"
# Gentoo linux root filesystem
-ROOTFS=$UMLTESTDIR/gentoo-fs-20060330.tar.bz2
+ROOTFS=$UMLTESTDIR/gentoo-fs-20071108.tar.bz2
# Size of the finished root filesystem in MB
ROOTFSSIZE=544
# Amount of Memory to use per UML [MB].
# If "auto" is stated 1/12 of total host ram will be used.
# Examples: MEM=64, MEM="128", MEM="auto"
-MEM=64
+MEM=96
# Directory where the UML kernels and file system will be built
BUILDDIR=$UMLTESTDIR/umlbuild
# Directory where test results will be stored
TESTRESULTSDIR=$UMLTESTDIR/testresults
+# Path to a full strongswan tree on the host system, which is
+# mounted into /root/strongswan-shared. This gives us an easy
+# way to apply and test changes instantly.
+SHAREDTREE=/home/martin/strongswan/trunk
+
# Timezone for the UMLs, look in /usr/share/zoneinfo!
TZUML="Europe/Zurich"
##############################################################
# How to start the UMLs?
#
-# Start the UML instance in KDE konsole (requires KDE)
-UMLSTARTMODE="konsole"
+# Start the UML instance in a KDE konsole (requires KDE)
+# UMLSTARTMODE="konsole"
+# Start the UML instance in a gnome-terminal (requires gnome)
+UMLSTARTMODE="gnome-terminal"
# Start the UML instance in an xterm (requires X11R6)
# UMLSTARTMODE="xterm"
# Start the UML instance without a terminal window
# Tests to do if $SELECTEDTESTSONLY is set "yes".
#
-SELECTEDTESTS="net2net-cert"
+SELECTEDTESTS="ikev2/rw-cert"
##############################################################
-# hostname and according IP(s)
-# You may change the IPs but keep them in the same net,
+# hostname and corresponding IPv4 and IPv6 addresses
+# You may change the IPs but keep them in the same subnet,
# this means retain the netmasks!
# Also don't use IPs ending with 254, they are reserved!
#
-HOSTNAMEIPS="\
-alice:10.1.0.10 \
-venus:10.1.0.20 \
-moon:192.168.0.1:10.1.0.1 \
-carol:192.168.0.100:10.3.0.1 \
-winnetou:192.168.0.150 \
-dave:192.168.0.200:10.3.0.2 \
-sun:192.168.0.2:10.2.0.1 \
-bob:10.2.0.10"
+HOSTNAMEIPV4="\
+alice,10.1.0.10,192.168.0.50 \
+venus,10.1.0.20 \
+moon,192.168.0.1,10.1.0.1 \
+carol,192.168.0.100,10.3.0.1 \
+winnetou,192.168.0.150 \
+dave,192.168.0.200,10.3.0.2 \
+sun,192.168.0.2,10.2.0.1 \
+bob,10.2.0.10"
+
+HOSTNAMEIPV6="\
+alice,fec1::10,fec0::5 \
+venus,fec1::20 \
+moon,fec0::1,fec1::1 \
+carol,fec0::10,fec3::1 \
+winnetou,fec0::15 \
+dave,fec0::20,fec3::2 \
+sun,fec0::2,fec2::1 \
+bob,fec2::10"
##############################################################
# VPN gateways / clients
##############################################################
# Network interfaces of the UML instances
#
-SWITCH_alice="eth0=daemon,,unix,/tmp/umlswitch1"
-SWITCH_venus="eth0=daemon,,unix,/tmp/umlswitch1"
-SWITCH_moon="eth0=daemon,,unix,/tmp/umlswitch0 \
- eth1=daemon,,unix,/tmp/umlswitch1"
-SWITCH_carol="eth0=daemon,,unix,/tmp/umlswitch0"
-SWITCH_winnetou="eth0=daemon,,unix,/tmp/umlswitch0"
-SWITCH_dave="eth0=daemon,,unix,/tmp/umlswitch0"
-SWITCH_sun="eth0=daemon,,unix,/tmp/umlswitch0 \
- eth1=daemon,,unix,/tmp/umlswitch2"
-SWITCH_bob="eth0=daemon,,unix,/tmp/umlswitch2"
-
-
-
-
+SWITCH_alice="eth0=daemon,fe:fd:0a:01:00:0a,unix,/tmp/umlswitch1 \
+ eth1=daemon,fe:fd:c0:a8:00:32,unix,/tmp/umlswitch0"
+SWITCH_venus="eth0=daemon,fe:fd:0a:01:00:14,unix,/tmp/umlswitch1"
+SWITCH_moon="eth0=daemon,fe:fd:c0:a8:00:01,unix,/tmp/umlswitch0 \
+ eth1=daemon,fe:fd:0a:01:00:01,unix,/tmp/umlswitch1"
+SWITCH_carol="eth0=daemon,fe:fd:c0:a8:00:64,unix,/tmp/umlswitch0"
+SWITCH_winnetou="eth0=daemon,fe:fd:c0:a8:00:96,unix,/tmp/umlswitch0"
+SWITCH_dave="eth0=daemon,fe:fd:c0:a8:00:c8,unix,/tmp/umlswitch0"
+SWITCH_sun="eth0=daemon,fe:fd:c0:a8:00:02,unix,/tmp/umlswitch0 \
+ eth1=daemon,fe:fd:0a:02:00:01,unix,/tmp/umlswitch2"
+SWITCH_bob="eth0=daemon,fe:fd:0a:02:00:0a,unix,/tmp/umlswitch2"
projects / strongswan.git / blobdiff