# RCSID $Id: testing.conf,v 1.52 2006/04/24 16:58:03 as Exp $
# Root directory of testing
-UMLTESTDIR=~/strongswan-testing
+UMLTESTDIR=/home/strongswan-testing
# Bzipped kernel sources
# (file extension .tar.bz2 required)
-KERNEL=$UMLTESTDIR/linux-2.6.17.7.tar.bz2
+KERNEL=$UMLTESTDIR/linux-2.6.20.tar.bz2
# Extract kernel version
KERNELVERSION=`basename $KERNEL .tar.bz2 | sed -e 's/linux-//'`
# Kernel configuration file
-KERNELCONFIG=$UMLTESTDIR/.config-2.6.17
+KERNELCONFIG=$UMLTESTDIR/.config-2.6.20
# Bzipped uml patch for kernel
-# (not needed anymore for 2.6.9 kernel or higher)
-UMLPATCH=
+UMLPATCH=$UMLTESTDIR/uml_jmpbuf-2.6.18.patch.bz2
# Bzipped source of strongSwan
-STRONGSWAN=$UMLTESTDIR/strongswan-4.0.3.tar.bz2
+STRONGSWAN=$UMLTESTDIR/strongswan-4.0.8.tar.bz2
# strongSwan compile options (use "yes" or "no")
USE_LIBCURL="yes"
USE_LEAK_DETECTIVE="no"
# Gentoo linux root filesystem
-ROOTFS=$UMLTESTDIR/gentoo-fs-20060330.tar.bz2
+ROOTFS=$UMLTESTDIR/gentoo-fs-20061006.tar.bz2
# Size of the finished root filesystem in MB
ROOTFSSIZE=544
# Amount of Memory to use per UML [MB].
# If "auto" is stated 1/12 of total host ram will be used.
# Examples: MEM=64, MEM="128", MEM="auto"
-MEM=64
+MEM=96
# Directory where the UML kernels and file system will be built
BUILDDIR=$UMLTESTDIR/umlbuild
# Filename of the built UML Kernel
-UMLKERNEL=$BUILDDIR/linux-uml-$KERNELVERSION
+UMLKERNEL=$UMLTESTDIR/linux
# Directory where test results will be stored
TESTRESULTSDIR=$UMLTESTDIR/testresults
# Path to a full strongswan tree on the host system, which is
# mounted into /root/strongswan-shared. This gives us an easy
# way to apply and test changes instantly.
-#SHAREDTREE=/home/mwilli/strongswan/trunk
+SHAREDTREE=/home/martin/strongswan/trunk
# Timezone for the UMLs, look in /usr/share/zoneinfo!
TZUML="Europe/Zurich"
# Enable particular steps in the make-testing and
# start-testing scripts
#
-ENABLE_BUILD_UMLKERNEL="yes"
+ENABLE_BUILD_UMLKERNEL="no"
ENABLE_BUILD_SSHKEYS="yes"
ENABLE_BUILD_HOSTCONFIG="yes"
ENABLE_BUILD_UMLROOTFS="yes"
ENABLE_BUILD_UMLHOSTFS="yes"
-ENABLE_START_TESTING="yes"
-ENABLE_DO_TESTS="yes"
+ENABLE_START_TESTING="no"
+ENABLE_DO_TESTS="no"
ENABLE_STOP_TESTING="no"
##############################################################
# How to start the UMLs?
#
# Start the UML instance in KDE konsole (requires KDE)
-UMLSTARTMODE="konsole"
+#UMLSTARTMODE="gnome-terminal"
# Start the UML instance in an xterm (requires X11R6)
-# UMLSTARTMODE="xterm"
+UMLSTARTMODE="xterm"
# Start the UML instance without a terminal window
# but screen -r <host> can open a window anytime
# UMLSTARTMODE="screen"
# Tests to do if $SELECTEDTESTSONLY is set "yes".
#
-SELECTEDTESTS="net2net-cert"
+SELECTEDTESTS="ikev2-net2net ikev2-rw"
##############################################################
# hostname and corresponding IPv4 and IPv6 addresses
##############################################################
# Network interfaces of the UML instances
#
-SWITCH_alice="eth0=daemon,,unix,/tmp/umlswitch1"
-SWITCH_venus="eth0=daemon,,unix,/tmp/umlswitch1"
-SWITCH_moon="eth0=daemon,,unix,/tmp/umlswitch0 \
- eth1=daemon,,unix,/tmp/umlswitch1"
-SWITCH_carol="eth0=daemon,,unix,/tmp/umlswitch0"
-SWITCH_winnetou="eth0=daemon,,unix,/tmp/umlswitch0"
-SWITCH_dave="eth0=daemon,,unix,/tmp/umlswitch0"
-SWITCH_sun="eth0=daemon,,unix,/tmp/umlswitch0 \
- eth1=daemon,,unix,/tmp/umlswitch2"
-SWITCH_bob="eth0=daemon,,unix,/tmp/umlswitch2"
+SWITCH_alice="eth0=daemon,fe:fd:0a:01:00:0a,unix,/tmp/umlswitch1"
+SWITCH_venus="eth0=daemon,fe:fd:0a:01:00:14,unix,/tmp/umlswitch1"
+SWITCH_moon="eth0=daemon,fe:fd:c0:a8:00:01,unix,/tmp/umlswitch0 \
+ eth1=daemon,fe:fd:0a:01:00:01,unix,/tmp/umlswitch1"
+SWITCH_carol="eth0=daemon,fe:fd:c0:a8:00:64,unix,/tmp/umlswitch0"
+SWITCH_winnetou="eth0=daemon,fe:fd:c0:a8:00:96,unix,/tmp/umlswitch0"
+SWITCH_dave="eth0=daemon,fe:fd:c0:a8:00:c8,unix,/tmp/umlswitch0"
+SWITCH_sun="eth0=daemon,fe:fd:c0:a8:00:02,unix,/tmp/umlswitch0 \
+ eth1=daemon,fe:fd:0a:02:00:01,unix,/tmp/umlswitch2"
+SWITCH_bob="eth0=daemon,fe:fd:0a:02:00:0a,unix,/tmp/umlswitch2"