version bumps
[strongswan.git] / testing / testing.conf
index 2551bbc..21b4d7a 100755 (executable)
 # RCSID $Id: testing.conf,v 1.52 2006/04/24 16:58:03 as Exp $
 
 # Root directory of testing
-UMLTESTDIR=~/strongswan-testing
+UMLTESTDIR=/home/strongswan-testing
 
 # Bzipped kernel sources
 # (file extension .tar.bz2 required)
-KERNEL=$UMLTESTDIR/linux-2.6.16.19.tar.bz2
+KERNEL=$UMLTESTDIR/linux-2.6.20.tar.bz2
 
 # Extract kernel version
 KERNELVERSION=`basename $KERNEL .tar.bz2 | sed -e 's/linux-//'`
 
 # Kernel configuration file
-KERNELCONFIG=$UMLTESTDIR/.config-2.6.16
+KERNELCONFIG=$UMLTESTDIR/.config-2.6.20
 
 # Bzipped uml patch for kernel
-# (not needed anymore for 2.6.9 kernel or higher)
-UMLPATCH=
+UMLPATCH=$UMLTESTDIR/uml_jmpbuf-2.6.18.patch.bz2
 
 # Bzipped source of strongSwan
-STRONGSWAN=$UMLTESTDIR/strongswan-4.0.1.tar.bz2
+STRONGSWAN=$UMLTESTDIR/strongswan-4.0.8.tar.bz2
 
 # strongSwan compile options (use "yes" or "no")
 USE_LIBCURL="yes"
 USE_LDAP="yes"
+USE_LEAK_DETECTIVE="no"
 
 # Gentoo linux root filesystem
-ROOTFS=$UMLTESTDIR/gentoo-fs-20060330.tar.bz2
+ROOTFS=$UMLTESTDIR/gentoo-fs-20061006.tar.bz2
 
 # Size of the finished root filesystem in MB
 ROOTFSSIZE=544
@@ -49,17 +49,22 @@ ROOTFSSIZE=544
 # Amount of Memory to use per UML [MB].
 # If "auto" is stated 1/12 of total host ram will be used.
 # Examples: MEM=64, MEM="128", MEM="auto"
-MEM=64
+MEM=96
 
 # Directory where the UML kernels and file system will be built
 BUILDDIR=$UMLTESTDIR/umlbuild
 
 # Filename of the built UML Kernel
-UMLKERNEL=$BUILDDIR/linux-uml-$KERNELVERSION
+UMLKERNEL=$UMLTESTDIR/linux
 
 # Directory where test results will be stored
 TESTRESULTSDIR=$UMLTESTDIR/testresults
 
+# Path to a full strongswan tree on the host system, which is
+# mounted into /root/strongswan-shared. This gives us an easy
+# way to apply and test changes instantly.
+SHAREDTREE=/home/martin/strongswan/trunk
+
 # Timezone for the UMLs, look in /usr/share/zoneinfo!
 TZUML="Europe/Zurich"
 
@@ -67,22 +72,22 @@ TZUML="Europe/Zurich"
 # Enable particular steps in the make-testing and
 # start-testing scripts
 #
-ENABLE_BUILD_UMLKERNEL="yes"
+ENABLE_BUILD_UMLKERNEL="no"
 ENABLE_BUILD_SSHKEYS="yes"
 ENABLE_BUILD_HOSTCONFIG="yes"
 ENABLE_BUILD_UMLROOTFS="yes"
 ENABLE_BUILD_UMLHOSTFS="yes"
-ENABLE_START_TESTING="yes"
-ENABLE_DO_TESTS="yes"
+ENABLE_START_TESTING="no"
+ENABLE_DO_TESTS="no"
 ENABLE_STOP_TESTING="no"
 
 ##############################################################
 # How to start the UMLs?
 #
 # Start the UML instance in KDE konsole (requires KDE)
-UMLSTARTMODE="konsole"
+#UMLSTARTMODE="gnome-terminal"
 # Start the UML instance in an xterm (requires X11R6)
-UMLSTARTMODE="xterm"
+UMLSTARTMODE="xterm"
 # Start the UML instance without a terminal window
 # but screen -r <host> can open a window anytime
 # UMLSTARTMODE="screen"
@@ -95,7 +100,7 @@ SELECTEDTESTSONLY="no"
 
 # Tests to do if $SELECTEDTESTSONLY is set "yes".
 #
-SELECTEDTESTS="net2net-cert"
+SELECTEDTESTS="ikev2-net2net ikev2-rw"
 
 ##############################################################
 # hostname and corresponding IPv4 and IPv6 addresses
@@ -148,16 +153,16 @@ IFCONFIG_2="10.2.0.254 netmask 255.255.0.0"
 ##############################################################
 # Network interfaces of the UML instances
 #
-SWITCH_alice="eth0=daemon,,unix,/tmp/umlswitch1"
-SWITCH_venus="eth0=daemon,,unix,/tmp/umlswitch1"
-SWITCH_moon="eth0=daemon,,unix,/tmp/umlswitch0 \
-             eth1=daemon,,unix,/tmp/umlswitch1"
-SWITCH_carol="eth0=daemon,,unix,/tmp/umlswitch0"
-SWITCH_winnetou="eth0=daemon,,unix,/tmp/umlswitch0"
-SWITCH_dave="eth0=daemon,,unix,/tmp/umlswitch0"
-SWITCH_sun="eth0=daemon,,unix,/tmp/umlswitch0 \
-            eth1=daemon,,unix,/tmp/umlswitch2"
-SWITCH_bob="eth0=daemon,,unix,/tmp/umlswitch2"
+SWITCH_alice="eth0=daemon,fe:fd:0a:01:00:0a,unix,/tmp/umlswitch1"
+SWITCH_venus="eth0=daemon,fe:fd:0a:01:00:14,unix,/tmp/umlswitch1"
+SWITCH_moon="eth0=daemon,fe:fd:c0:a8:00:01,unix,/tmp/umlswitch0 \
+             eth1=daemon,fe:fd:0a:01:00:01,unix,/tmp/umlswitch1"
+SWITCH_carol="eth0=daemon,fe:fd:c0:a8:00:64,unix,/tmp/umlswitch0"
+SWITCH_winnetou="eth0=daemon,fe:fd:c0:a8:00:96,unix,/tmp/umlswitch0"
+SWITCH_dave="eth0=daemon,fe:fd:c0:a8:00:c8,unix,/tmp/umlswitch0"
+SWITCH_sun="eth0=daemon,fe:fd:c0:a8:00:02,unix,/tmp/umlswitch0 \
+            eth1=daemon,fe:fd:0a:02:00:01,unix,/tmp/umlswitch2"
+SWITCH_bob="eth0=daemon,fe:fd:0a:02:00:0a,unix,/tmp/umlswitch2"