2 # Global configuration file for strongswan UML testing.
4 # Copyright (C) 2004 Eric Marchionni, Patrik Rayo
5 # Zuercher Hochschule Winterthur
7 # This program is free software; you can redistribute it and/or modify it
8 # under the terms of the GNU General Public License as published by the
9 # Free Software Foundation; either version 2 of the License, or (at your
10 # option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
12 # This program is distributed in the hope that it will be useful, but
13 # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
14 # or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 # RCSID $Id: testing.conf,v 1.52 2006/04/24 16:58:03 as Exp $
19 # Root directory of testing
20 UMLTESTDIR=~/strongswan-testing
22 # Bzipped kernel sources
23 # (file extension .tar.bz2 required)
24 KERNEL=$UMLTESTDIR/linux-2.6.24.2.tar.bz2
26 # Extract kernel version
27 KERNELVERSION=`basename $KERNEL .tar.bz2 | sed -e 's/linux-//'`
29 # Kernel configuration file
30 KERNELCONFIG=$UMLTESTDIR/.config-2.6.24
32 # Bzipped uml patch for kernel
33 # (not needed anymore for 2.6.9 kernel or higher)
34 #UMLPATCH=$UMLTESTDIR/uml_jmpbuf-2.6.18.patch.bz2
36 # Bzipped source of strongSwan
37 STRONGSWAN=$UMLTESTDIR/strongswan-4.2.0.tar.bz2
39 # strongSwan compile options (use "yes" or "no")
44 USE_LEAK_DETECTIVE="no"
46 # Gentoo linux root filesystem
47 ROOTFS=$UMLTESTDIR/gentoo-fs-20071108.tar.bz2
49 # Size of the finished root filesystem in MB
52 # Amount of Memory to use per UML [MB].
53 # If "auto" is stated 1/12 of total host ram will be used.
54 # Examples: MEM=64, MEM="128", MEM="auto"
57 # Directory where the UML kernels and file system will be built
58 BUILDDIR=$UMLTESTDIR/umlbuild
60 # Filename of the built UML Kernel
61 UMLKERNEL=$BUILDDIR/linux-uml-$KERNELVERSION
63 # Directory where test results will be stored
64 TESTRESULTSDIR=$UMLTESTDIR/testresults
66 # Path to a full strongswan tree on the host system, which is
67 # mounted into /root/strongswan-shared. This gives us an easy
68 # way to apply and test changes instantly.
69 SHAREDTREE=/home/martin/strongswan/trunk
71 # Timezone for the UMLs, look in /usr/share/zoneinfo!
74 ##############################################################
75 # Enable particular steps in the make-testing and
76 # start-testing scripts
78 ENABLE_BUILD_UMLKERNEL="yes"
79 ENABLE_BUILD_SSHKEYS="yes"
80 ENABLE_BUILD_HOSTCONFIG="yes"
81 ENABLE_BUILD_UMLROOTFS="yes"
82 ENABLE_BUILD_UMLHOSTFS="yes"
83 ENABLE_START_TESTING="yes"
85 ENABLE_STOP_TESTING="no"
87 ##############################################################
88 # How to start the UMLs?
90 # Start the UML instance in a KDE konsole (requires KDE)
91 # UMLSTARTMODE="konsole"
92 # Start the UML instance in a gnome-terminal (requires gnome)
93 UMLSTARTMODE="gnome-terminal"
94 # Start the UML instance in an xterm (requires X11R6)
95 # UMLSTARTMODE="xterm"
96 # Start the UML instance without a terminal window
97 # but screen -r <host> can open a window anytime
98 # UMLSTARTMODE="screen"
100 ##############################################################
101 # If set to "yes" only the tests stated at $SELECTEDTESTS
102 # will be executed. (use "yes" or "no")
104 SELECTEDTESTSONLY="no"
106 # Tests to do if $SELECTEDTESTSONLY is set "yes".
108 SELECTEDTESTS="ikev2/rw-cert"
110 ##############################################################
111 # hostname and corresponding IPv4 and IPv6 addresses
112 # You may change the IPs but keep them in the same subnet,
113 # this means retain the netmasks!
114 # Also don't use IPs ending with 254, they are reserved!
117 alice,10.1.0.10,192.168.0.50 \
119 moon,192.168.0.1,10.1.0.1 \
120 carol,192.168.0.100,10.3.0.1 \
121 winnetou,192.168.0.150 \
122 dave,192.168.0.200,10.3.0.2 \
123 sun,192.168.0.2,10.2.0.1 \
127 alice,fec1::10,fec0::5 \
129 moon,fec0::1,fec1::1 \
130 carol,fec0::10,fec3::1 \
132 dave,fec0::20,fec3::2 \
133 sun,fec0::2,fec2::1 \
136 ##############################################################
137 # VPN gateways / clients
138 # The hosts stated here will be created. Possible values
139 # are sun, moon, dave, carol, alice, venus, bob, winnetou.
140 # It's fine to make them all unless you don't have much
141 # ressources. In this case we assume you know what you do!
143 STRONGSWANHOSTS="sun moon dave carol alice venus bob winnetou"
145 ##############################################################
146 # Needed programs, do not change!
148 PROGRAMS="uml_switch uml_mconsole ssh ssh-keygen iptables \
149 chroot screen mkreiserfs"
151 ##############################################################
152 # IP parameters of the UML switches
154 IFCONFIG_0="192.168.0.254 netmask 255.255.255.0"
155 IFCONFIG_1="10.1.0.254 netmask 255.255.0.0"
156 IFCONFIG_2="10.2.0.254 netmask 255.255.0.0"
158 ##############################################################
159 # Network interfaces of the UML instances
161 SWITCH_alice="eth0=daemon,fe:fd:0a:01:00:0a,unix,/tmp/umlswitch1 \
162 eth1=daemon,fe:fd:c0:a8:00:32,unix,/tmp/umlswitch0"
163 SWITCH_venus="eth0=daemon,fe:fd:0a:01:00:14,unix,/tmp/umlswitch1"
164 SWITCH_moon="eth0=daemon,fe:fd:c0:a8:00:01,unix,/tmp/umlswitch0 \
165 eth1=daemon,fe:fd:0a:01:00:01,unix,/tmp/umlswitch1"
166 SWITCH_carol="eth0=daemon,fe:fd:c0:a8:00:64,unix,/tmp/umlswitch0"
167 SWITCH_winnetou="eth0=daemon,fe:fd:c0:a8:00:96,unix,/tmp/umlswitch0"
168 SWITCH_dave="eth0=daemon,fe:fd:c0:a8:00:c8,unix,/tmp/umlswitch0"
169 SWITCH_sun="eth0=daemon,fe:fd:c0:a8:00:02,unix,/tmp/umlswitch0 \
170 eth1=daemon,fe:fd:0a:02:00:01,unix,/tmp/umlswitch2"
171 SWITCH_bob="eth0=daemon,fe:fd:0a:02:00:0a,unix,/tmp/umlswitch2"