2 # Global configuration file for strongswan UML testing.
4 # Copyright (C) 2004 Eric Marchionni, Patrik Rayo
5 # Zuercher Hochschule Winterthur
7 # This program is free software; you can redistribute it and/or modify it
8 # under the terms of the GNU General Public License as published by the
9 # Free Software Foundation; either version 2 of the License, or (at your
10 # option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
12 # This program is distributed in the hope that it will be useful, but
13 # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
14 # or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 # Root directory of testing
18 UMLTESTDIR=~/strongswan-testing
20 # Bzipped kernel sources
21 # (file extension .tar.bz2 required)
22 KERNEL=$UMLTESTDIR/linux-2.6.36.tar.bz2
24 # Extract kernel version
25 KERNELVERSION=`basename $KERNEL .tar.bz2 | sed -e 's/linux-//'`
27 # Kernel configuration file
28 KERNELCONFIG=$UMLTESTDIR/.config-2.6.36
30 # Bzipped uml patch for kernel
31 #UMLPATCH=$UMLTESTDIR/xfrm_mark.patch.bz2
33 # Bzipped source of strongSwan
34 STRONGSWAN=$UMLTESTDIR/strongswan-4.5.1.tar.bz2
36 # strongSwan compile options (use "yes" or "no")
42 USE_EAP_MSCHAPV2="yes"
43 USE_EAP_IDENTITY="yes"
55 USE_KERNEL_PFKEY="yes"
56 USE_INTEGRITY_TEST="yes"
57 USE_LEAK_DETECTIVE="yes"
59 USE_TEST_VECTORS="yes"
61 USE_SOCKET_DEFAULT="yes"
62 USE_SOCKET_DYNAMIC="yes"
70 # Gentoo linux root filesystem
71 ROOTFS=$UMLTESTDIR/gentoo-fs-20100830.tar.bz2
73 # Size of the finished root filesystem in MB
76 # Amount of Memory to use per UML [MB].
77 # If "auto" is stated 1/12 of total host ram will be used.
78 # Examples: MEM=64, MEM="128", MEM="auto"
81 # Directory where the UML kernels and file system will be built
82 BUILDDIR=$UMLTESTDIR/umlbuild
84 # Filename of the built UML Kernel
85 UMLKERNEL=$BUILDDIR/linux-uml-$KERNELVERSION
87 # Directory where test results will be stored
88 TESTRESULTSDIR=$UMLTESTDIR/testresults
90 # SSH configuration (speedup SSH)
91 SSHCONF="-F $UMLTESTDIR/testing/ssh_config"
93 # Path to a full strongswan tree on the host system, which is
94 # mounted into /root/strongswan-shared. This gives us an easy
95 # way to apply and test changes instantly.
96 #SHAREDTREE=/home/martin/strongswan/trunk
98 # Timezone for the UMLs, look in /usr/share/zoneinfo!
101 ##############################################################
102 # Enable particular steps in the make-testing and
103 # start-testing scripts
105 ENABLE_BUILD_UMLKERNEL="yes"
106 ENABLE_BUILD_SSHKEYS="yes"
107 ENABLE_BUILD_HOSTCONFIG="yes"
108 ENABLE_BUILD_UMLROOTFS="yes"
109 ENABLE_BUILD_UMLHOSTFS="yes"
110 ENABLE_START_TESTING="yes"
112 ENABLE_STOP_TESTING="no"
114 ##############################################################
115 # How to start the UMLs?
117 # Start the UML instance in KDE konsole (requires KDE)
118 # UMLSTARTMODE="konsole"
119 # Start the UML instance in a gnome-terminal (requires gnome)
120 UMLSTARTMODE="gnome-terminal"
121 # Start the UML instance in an xterm (requires X11R6)
122 # UMLSTARTMODE="xterm"
123 # Start the UML instance without a terminal window
124 # but screen -r <host> can open a window anytime
125 # UMLSTARTMODE="screen"
127 ##############################################################
128 # If set to "yes" only the tests stated at $SELECTEDTESTS
129 # will be executed. (use "yes" or "no")
131 SELECTEDTESTSONLY="no"
133 # Tests to do if $SELECTEDTESTSONLY is set "yes".
135 SELECTEDTESTS="ikev2/rw-cert"
137 ##############################################################
138 # hostname and corresponding IPv4 and IPv6 addresses
139 # You may change the IPs but keep them in the same subnet,
140 # this means retain the netmasks!
141 # Also don't use IPs ending with 254, they are reserved!
144 alice,10.1.0.10,192.168.0.50 \
146 moon,192.168.0.1,10.1.0.1 \
147 carol,192.168.0.100,10.3.0.1 \
148 winnetou,192.168.0.150 \
149 dave,192.168.0.200,10.3.0.2 \
150 sun,192.168.0.2,10.2.0.1 \
154 alice,fec1::10,fec0::5 \
156 moon,fec0::1,fec1::1 \
157 carol,fec0::10,fec3::1 \
159 dave,fec0::20,fec3::2 \
160 sun,fec0::2,fec2::1 \
163 ##############################################################
164 # VPN gateways / clients
165 # The hosts stated here will be created. Possible values
166 # are sun, moon, dave, carol, alice, venus, bob, winnetou.
167 # It's fine to make them all unless you don't have much
168 # ressources. In this case we assume you know what you do!
170 STRONGSWANHOSTS="sun moon dave carol alice venus bob winnetou"
172 ##############################################################
173 # Needed programs, do not change!
175 PROGRAMS="uml_switch uml_mconsole ssh ssh-keygen iptables \
176 chroot screen mkreiserfs"
178 ##############################################################
179 # IP parameters of the UML switches
181 IFCONFIG_0="192.168.0.254 netmask 255.255.255.0"
182 IFCONFIG_1="10.1.0.254 netmask 255.255.0.0"
183 IFCONFIG_2="10.2.0.254 netmask 255.255.0.0"
185 ##############################################################
186 # Network interfaces of the UML instances
188 SWITCH_alice="eth0=tuntap,tap1_alice,fe:fd:0a:01:00:0a \
189 eth1=tuntap,tap0_alice,fe:fd:c0:a8:00:32"
190 SWITCH_venus="eth0=tuntap,tap1_venus,fe:fd:0a:01:00:14"
191 SWITCH_moon="eth0=tuntap,tap0_moon,fe:fd:c0:a8:00:01 \
192 eth1=tuntap,tap1_moon,fe:fd:0a:01:00:01"
193 SWITCH_carol="eth0=tuntap,tap0_carol,fe:fd:c0:a8:00:64"
194 SWITCH_winnetou="eth0=tuntap,tap0_winnetou,fe:fd:c0:a8:00:96"
195 SWITCH_dave="eth0=tuntap,tap0_dave,fe:fd:c0:a8:00:c8"
196 SWITCH_sun="eth0=tuntap,tap0_sun,fe:fd:c0:a8:00:02 \
197 eth1=tuntap,tap2_sun,fe:fd:0a:02:00:01"
198 SWITCH_bob="eth0=tuntap,tap2_bob,fe:fd:0a:02:00:0a"