4 - The tnc-ifmap plugin implements a TNC IF-MAP 2.0 client that which
5 can deliver metadata about IKE_SAs via a SOAP interface to a
6 MAP server. The tnc-ifmap plugin requires the Apache Axis2/C library.
12 - Our private libraries (e.g. libstrongswan) are not installed directly in
13 prefix/lib anymore. Instead a subdirectory is used (prefix/lib/ipsec/ by
14 default). The plugins directory is also moved from libexec/ipsec/ to that
17 - The dynamic IMC/IMV libraries were moved from the plugins directory to
18 a new imcvs directory in the prefix/lib/ipsec/ subdirectory.
20 - Job priorities were introduced to prevent thread starvation caused by too
21 many threads handling blocking operations (such as CRL fetching). Refer to
22 strongswan.conf(5) for details.
24 - Two new strongswan.conf options allow to fine-tune performance on IKEv2
25 gateways by dropping IKE_SA_INIT requests on high load.
27 - IKEv2 charon daemon supports start PASS and DROP shunt policies
28 preventing traffic to go through IPsec connections. Installation of the
29 shunt policies either via the XFRM netfilter or PFKEYv2 IPsec kernel
32 - The history of policies installed in the kernel is now tracked so that e.g.
33 trap policies are correctly updated when reauthenticated SAs are terminated.
35 - IMC/IMV Scanner pair implementing the RFC 5792 PA-TNC (IF-M) protocol.
36 Using "netstat -l" the IMC scans open listening ports on the TNC client
37 and sends a port list to the IMV which based on a port policy decides if
38 the client is admitted to the network.
39 (--enable-imc-scanner/--enable-imv-scanner).
41 - IMC/IMV Test pair implementing the RFC 5792 PA-TNC (IF-M) protocol.
42 (--enable-imc-test/--enable-imv-test).
44 - The IKEv2 close action does not use the same value as the ipsec.conf dpdaction
45 setting, but the value defined by its own closeaction keyword. The action
46 is triggered if the remote peer closes a CHILD_SA unexpectedly.
52 - The whitelist plugin for the IKEv2 daemon maintains an in-memory identity
53 whitelist. Any connection attempt of peers not whitelisted will get rejected.
54 The 'ipsec whitelist' utility provides a simple command line frontend for
55 whitelist administration.
57 - The duplicheck plugin provides a specialized form of duplicate checking,
58 doing a liveness check on the old SA and optionally notify a third party
59 application about detected duplicates.
61 - The coupling plugin permanently couples two or more devices by limiting
62 authentication to previously used certificates.
64 - In the case that the peer config and child config don't have the same name
65 (usually in SQL database defined connections), ipsec up|route <peer config>
66 starts|routes all associated child configs and ipsec up|route <child config>
67 only starts|routes the specific child config.
69 - fixed the encoding and parsing of X.509 certificate policy statements (CPS).
71 - Duncan Salerno contributed the eap-sim-pcsc plugin implementing a
72 pcsc-lite based SIM card backend.
74 - The eap-peap plugin implements the EAP PEAP protocol. Interoperates
75 successfully with a FreeRADIUS server and Windows 7 Agile VPN clients.
77 - The IKEv2 daemon charon rereads strongswan.conf on SIGHUP and instructs
78 all plugins to reload. Currently only the eap-radius and the attr plugins
79 support configuration reloading.
81 - Added userland support to the IKEv2 daemon for Extended Sequence Numbers
82 support coming with Linux 2.6.39. To enable ESN on a connection, add
83 the 'esn' keyword to the proposal. The default proposal uses 32-bit sequence
84 numbers only ('noesn'), and the same value is used if no ESN mode is
85 specified. To negotiate ESN support with the peer, include both, e.g.
86 esp=aes128-sha1-esn-noesn.
88 - In addition to ESN, Linux 2.6.39 gained support for replay windows larger
89 than 32 packets. The new global strongswan.conf option 'charon.replay_window'
90 configures the size of the replay window, in packets.
96 - Sansar Choinyambuu implemented the RFC 5793 Posture Broker Protocol (BP)
97 compatible with Trusted Network Connect (TNC). The TNCCS 2.0 protocol
98 requires the tnccs_20, tnc_imc and tnc_imv plugins but does not depend
99 on the libtnc library. Any available IMV/IMC pairs conforming to the
100 Trusted Computing Group's TNC-IF-IMV/IMC 1.2 interface specification
101 can be loaded via /etc/tnc_config.
103 - Re-implemented the TNCCS 1.1 protocol by using the tnc_imc and tnc_imv
104 in place of the external libtnc library.
106 - The tnccs_dynamic plugin loaded on a TNC server in addition to the
107 tnccs_11 and tnccs_20 plugins, dynamically detects the IF-TNCCS
108 protocol version used by a TNC client and invokes an instance of
109 the corresponding protocol stack.
111 - IKE and ESP proposals can now be stored in an SQL database using a
112 new proposals table. The start_action field in the child_configs
113 tables allows the automatic starting or routing of connections stored
116 - The new certificate_authorities and certificate_distribution_points
117 tables make it possible to store CRL and OCSP Certificate Distribution
118 points in an SQL database.
120 - The new 'include' statement allows to recursively include other files in
121 strongswan.conf. Existing sections and values are thereby extended and
122 replaced, respectively.
124 - Due to the changes in the parser for strongswan.conf, the configuration
125 syntax for the attr plugin has changed. Previously, it was possible to
126 specify multiple values of a specific attribute type by adding multiple
127 key/value pairs with the same key (e.g. dns) to the plugins.attr section.
128 Because values with the same key now replace previously defined values
129 this is not possible anymore. As an alternative, multiple values can be
130 specified by separating them with a comma (e.g. dns = 1.2.3.4, 2.3.4.5).
132 - ipsec listalgs now appends (set in square brackets) to each crypto
133 algorithm listed the plugin that registered the function.
135 - Traffic Flow Confidentiality padding supported with Linux 2.6.38 can be used
136 by the IKEv2 daemon. The ipsec.conf 'tfc' keyword pads all packets to a given
137 boundary, the special value '%mtu' pads all packets to the path MTU.
139 - The new af-alg plugin can use various crypto primitives of the Linux Crypto
140 API using the AF_ALG interface introduced with 2.6.38. This removes the need
141 for additional userland implementations of symmetric cipher, hash, hmac and
144 - The IKEv2 daemon supports the INITIAL_CONTACT notify as initiator and
145 responder. The notify is sent when initiating configurations with a unique
146 policy, set in ipsec.conf via the global 'uniqueids' option.
148 - The conftest conformance testing framework enables the IKEv2 stack to perform
149 many tests using a distinct tool and configuration frontend. Various hooks
150 can alter reserved bits, flags, add custom notifies and proposals, reorder
151 or drop messages and much more. It is enabled using the --enable-conftest
154 - The new libstrongswan constraints plugin provides advanced X.509 constraint
155 checking. In additon to X.509 pathLen constraints, the plugin checks for
156 nameConstraints and certificatePolicies, including policyMappings and
157 policyConstraints. The x509 certificate plugin and the pki tool have been
158 enhanced to support these extensions. The new left/rightcertpolicy ipsec.conf
159 connection keywords take OIDs a peer certificate must have.
161 - The left/rightauth ipsec.conf keywords accept values with a minimum strength
162 for trustchain public keys in bits, such as rsa-2048 or ecdsa-256.
164 - The revocation and x509 libstrongswan plugins and the pki tool gained basic
165 support for delta CRLs.
171 - IMPORTANT: the default keyexchange mode 'ike' is changing with release 4.5
172 from 'ikev1' to 'ikev2', thus commemorating the five year anniversary of the
173 IKEv2 RFC 4306 and its mature successor RFC 5996. The time has definitively
174 come for IKEv1 to go into retirement and to cede its place to the much more
175 robust, powerful and versatile IKEv2 protocol!
177 - Added new ctr, ccm and gcm plugins providing Counter, Counter with CBC-MAC
178 and Galois/Counter Modes based on existing CBC implementations. These
179 new plugins bring support for AES and Camellia Counter and CCM algorithms
180 and the AES GCM algorithms for use in IKEv2.
182 - The new pkcs11 plugin brings full Smartcard support to the IKEv2 daemon and
183 the pki utility using one or more PKCS#11 libraries. It currently supports
184 RSA private and public key operations and loads X.509 certificates from
187 - Implemented a general purpose TLS stack based on crypto and credential
188 primitives of libstrongswan. libtls supports TLS versions 1.0, 1.1 and 1.2,
189 ECDHE-ECDSA/RSA, DHE-RSA and RSA key exchange algorithms and RSA/ECDSA based
190 client authentication.
192 - Based on libtls, the eap-tls plugin brings certificate based EAP
193 authentication for client and server. It is compatible to Windows 7 IKEv2
194 Smartcard authentication and the OpenSSL based FreeRADIUS EAP-TLS backend.
196 - Implemented the TNCCS 1.1 Trusted Network Connect protocol using the
197 libtnc library on the strongSwan client and server side via the tnccs_11
198 plugin and optionally connecting to a TNC@FHH-enhanced FreeRADIUS AAA server.
199 Depending on the resulting TNC Recommendation, strongSwan clients are granted
200 access to a network behind a strongSwan gateway (allow), are put into a
201 remediation zone (isolate) or are blocked (none), respectively. Any number
202 of Integrity Measurement Collector/Verifier pairs can be attached
203 via the tnc-imc and tnc-imv charon plugins.
205 - The IKEv1 daemon pluto now uses the same kernel interfaces as the IKEv2
206 daemon charon. As a result of this, pluto now supports xfrm marks which
207 were introduced in charon with 4.4.1.
209 - Applets for Maemo 5 (Nokia) allow to easily configure and control IKEv2
210 based VPN connections with EAP authentication on supported devices.
212 - The RADIUS plugin eap-radius now supports multiple RADIUS servers for
213 redundant setups. Servers are selected by a defined priority, server load and
216 - The simple led plugin controls hardware LEDs through the Linux LED subsystem.
217 It currently shows activity of the IKE daemon and is a good example how to
218 implement a simple event listener.
220 - Improved MOBIKE behavior in several corner cases, for instance, if the
221 initial responder moves to a different address.
223 - Fixed left-/rightnexthop option, which was broken since 4.4.0.
225 - Fixed a bug not releasing a virtual IP address to a pool if the XAUTH
226 identity was different from the IKE identity.
228 - Fixed the alignment of ModeConfig messages on 4-byte boundaries in the
229 case where the attributes are not a multiple of 4 bytes (e.g. Cisco's
232 - Fixed the interoperability of the socket_raw and socket_default
235 - Added man page for strongswan.conf
241 - Support of xfrm marks in IPsec SAs and IPsec policies introduced
242 with the Linux 2.6.34 kernel. For details see the example scenarios
243 ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp.
245 - The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used
246 in a user-specific updown script to set marks on inbound ESP or
249 - The openssl plugin now supports X.509 certificate and CRL functions.
251 - OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled
252 by default. Plase update manual load directives in strongswan.conf.
254 - RFC3779 ipAddrBlock constraint checking has been moved to the addrblock
255 plugin, disabled by default. Enable it and update manual load directives
256 in strongswan.conf, if required.
258 - The pki utility supports CRL generation using the --signcrl command.
260 - The ipsec pki --self, --issue and --req commands now support output in
261 PEM format using the --outform pem option.
263 - The major refactoring of the IKEv1 Mode Config functionality now allows
264 the transport and handling of any Mode Config attribute.
266 - The RADIUS proxy plugin eap-radius now supports multiple servers. Configured
267 servers are chosen randomly, with the option to prefer a specific server.
268 Non-responding servers are degraded by the selection process.
270 - The ipsec pool tool manages arbitrary configuration attributes stored
271 in an SQL database. ipsec pool --help gives the details.
273 - The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA,
274 reading triplets/quintuplets from an SQL database.
276 - The High Availability plugin now supports a HA enabled in-memory address
277 pool and Node reintegration without IKE_SA rekeying. The latter allows
278 clients without IKE_SA rekeying support to keep connected during
279 reintegration. Additionally, many other issues have been fixed in the ha
282 - Fixed a potential remote code execution vulnerability resulting from
283 the misuse of snprintf(). The vulnerability is exploitable by
284 unauthenticated users.
290 - The IKEv2 High Availability plugin has been integrated. It provides
291 load sharing and failover capabilities in a cluster of currently two nodes,
292 based on an extend ClusterIP kernel module. More information is available at
293 http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
294 The development of the High Availability functionality was sponsored by
295 secunet Security Networks AG.
297 - Added IKEv1 and IKEv2 configuration support for the AES-GMAC
298 authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
299 2.6.34 kernel is required to make AES-GMAC available via the XFRM
302 - Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp, gcrypt
303 and openssl plugins, usable by both pluto and charon. The new proposal
304 keywords are modp1024s160, modp2048s224 and modp2048s256. Thanks to Joy Latten
305 from IBM for his contribution.
307 - The IKEv1 pluto daemon supports RAM-based virtual IP pools using
308 the rightsourceip directive with a subnet from which addresses
311 - The ipsec pki --gen and --pub commands now allow the output of
312 private and public keys in PEM format using the --outform pem
315 - The new DHCP plugin queries virtual IP addresses for clients from a DHCP
316 server using broadcasts, or a defined server using the
317 charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server information
318 is additionally served to clients if the DHCP server provides such
319 information. The plugin is used in ipsec.conf configurations having
320 rightsourceip set to %dhcp.
322 - A new plugin called farp fakes ARP responses for virtual IP addresses
323 handed out to clients from the IKEv2 daemon charon. The plugin lets a
324 road-warrior act as a client on the local LAN if it uses a virtual IP
325 from the responders subnet, e.g. acquired using the DHCP plugin.
327 - The existing IKEv2 socket implementations have been migrated to the
328 socket-default and the socket-raw plugins. The new socket-dynamic plugin
329 binds sockets dynamically to ports configured via the left-/rightikeport
330 ipsec.conf connection parameters.
332 - The android charon plugin stores received DNS server information as "net.dns"
333 system properties, as used by the Android platform.
339 - The IKEv2 daemon supports RFC 3779 IP address block constraints
340 carried as a critical X.509v3 extension in the peer certificate.
342 - The ipsec pool --add|del dns|nbns command manages DNS and NBNS name
343 server entries that are sent via the IKEv1 Mode Config or IKEv2
344 Configuration Payload to remote clients.
346 - The Camellia cipher can be used as an IKEv1 encryption algorithm.
348 - The IKEv1 and IKEV2 daemons now check certificate path length constraints.
350 - The new ipsec.conf conn option "inactivity" closes a CHILD_SA if no traffic
351 was sent or received within the given interval. To close the complete IKE_SA
352 if its only CHILD_SA was inactive, set the global strongswan.conf option
353 "charon.inactivity_close_ike" to yes.
355 - More detailed IKEv2 EAP payload information in debug output
357 - IKEv2 EAP-SIM and EAP-AKA share joint libsimaka library
359 - Added required userland changes for proper SHA256 and SHA384/512 in ESP that
360 will be introduced with Linux 2.6.33. The "sha256"/"sha2_256" keyword now
361 configures the kernel with 128 bit truncation, not the non-standard 96
362 bit truncation used by previous releases. To use the old 96 bit truncation
363 scheme, the new "sha256_96" proposal keyword has been introduced.
365 - Fixed IPComp in tunnel mode, stripping out the duplicated outer header. This
366 change makes IPcomp tunnel mode connections incompatible with previous
367 releases; disable compression on such tunnels.
369 - Fixed BEET mode connections on recent kernels by installing SAs with
370 appropriate traffic selectors, based on a patch by Michael Rossberg.
372 - Using extensions (such as BEET mode) and crypto algorithms (such as twofish,
373 serpent, sha256_96) allocated in the private use space now require that we
374 know its meaning, i.e. we are talking to strongSwan. Use the new
375 "charon.send_vendor_id" option in strongswan.conf to let the remote peer know
378 - Experimental support for draft-eronen-ipsec-ikev2-eap-auth, where the
379 responder omits public key authentication in favor of a mutual authentication
380 method. To enable EAP-only authentication, set rightauth=eap on the responder
381 to rely only on the MSK constructed AUTH payload. This not-yet standardized
382 extension requires the strongSwan vendor ID introduced above.
384 - The IKEv1 daemon ignores the Juniper SRX notification type 40001, thus
385 allowing interoperability.
391 - The IKEv1 pluto daemon can now use SQL-based address pools to deal out
392 virtual IP addresses as a Mode Config server. The pool capability has been
393 migrated from charon's sql plugin to a new attr-sql plugin which is loaded
394 by libstrongswan and which can be used by both daemons either with a SQLite
395 or MySQL database and the corresponding plugin.
397 - Plugin names have been streamlined: EAP plugins now have a dash after eap
398 (e.g. eap-sim), as it is used with the --enable-eap-sim ./configure option.
399 Plugin configuration sections in strongswan.conf now use the same name as the
400 plugin itself (i.e. with a dash). Make sure to update "load" directives and
401 the affected plugin sections in existing strongswan.conf files.
403 - The private/public key parsing and encoding has been split up into
404 separate pkcs1, pgp, pem and dnskey plugins. The public key implementation
405 plugins gmp, gcrypt and openssl can all make use of them.
407 - The EAP-AKA plugin can use different backends for USIM/quintuplet
408 calculations, very similar to the EAP-SIM plugin. The existing 3GPP2 software
409 implementation has been migrated to a separate plugin.
411 - The IKEv2 daemon charon gained basic PGP support. It can use locally installed
412 peer certificates and can issue signatures based on RSA private keys.
414 - The new 'ipsec pki' tool provides a set of commands to maintain a public
415 key infrastructure. It currently supports operations to create RSA and ECDSA
416 private/public keys, calculate fingerprints and issue or verify certificates.
418 - Charon uses a monotonic time source for statistics and job queueing, behaving
419 correctly if the system time changes (e.g. when using NTP).
421 - In addition to time based rekeying, charon supports IPsec SA lifetimes based
422 on processed volume or number of packets. They new ipsec.conf paramaters
423 'lifetime' (an alias to 'keylife'), 'lifebytes' and 'lifepackets' handle
424 SA timeouts, while the parameters 'margintime' (an alias to rekeymargin),
425 'marginbytes' and 'marginpackets' trigger the rekeying before a SA expires.
426 The existing parameter 'rekeyfuzz' affects all margins.
428 - If no CA/Gateway certificate is specified in the NetworkManager plugin,
429 charon uses a set of trusted root certificates preinstalled by distributions.
430 The directory containing CA certificates can be specified using the
431 --with-nm-ca-dir=path configure option.
433 - Fixed the encoding of the Email relative distinguished name in left|rightid
436 - Fixed the broken parsing of PKCS#7 wrapped certificates by the pluto daemon.
438 - Fixed smartcard-based authentication in the pluto daemon which was broken by
439 the ECDSA support introduced with the 4.3.2 release.
441 - A patch contributed by Heiko Hund fixes mixed IPv6 in IPv4 and vice versa
442 tunnels established with the IKEv1 pluto daemon.
444 - The pluto daemon now uses the libstrongswan x509 plugin for certificates and
445 CRls and the struct id type was replaced by identification_t used by charon
446 and the libstrongswan library.
452 - IKEv2 charon daemon ported to FreeBSD and Mac OS X. Installation details can
453 be found on wiki.strongswan.org.
455 - ipsec statusall shows the number of bytes transmitted and received over
456 ESP connections configured by the IKEv2 charon daemon.
458 - The IKEv2 charon daemon supports include files in ipsec.secrets.
464 - The configuration option --enable-integrity-test plus the strongswan.conf
465 option libstrongswan.integrity_test = yes activate integrity tests
466 of the IKE daemons charon and pluto, libstrongswan and all loaded
467 plugins. Thus dynamic library misconfigurations and non-malicious file
468 manipulations can be reliably detected.
470 - The new default setting libstrongswan.ecp_x_coordinate_only=yes allows
471 IKEv1 interoperability with MS Windows using the ECP DH groups 19 and 20.
473 - The IKEv1 pluto daemon now supports the AES-CCM and AES-GCM ESP
474 authenticated encryption algorithms.
476 - The IKEv1 pluto daemon now supports V4 OpenPGP keys.
478 - The RDN parser vulnerability discovered by Orange Labs research team
479 was not completely fixed in version 4.3.2. Some more modifications
480 had to be applied to the asn1_length() function to make it robust.
486 - The new gcrypt plugin provides symmetric cipher, hasher, RNG, Diffie-Hellman
487 and RSA crypto primitives using the LGPL licensed GNU gcrypt library.
489 - libstrongswan features an integrated crypto selftest framework for registered
490 algorithms. The test-vector plugin provides a first set of test vectors and
491 allows pluto and charon to rely on tested crypto algorithms.
493 - pluto can now use all libstrongswan plugins with the exception of x509 and xcbc.
494 Thanks to the openssl plugin, the ECP Diffie-Hellman groups 19, 20, 21, 25, and
495 26 as well as ECDSA-256, ECDSA-384, and ECDSA-521 authentication can be used
498 - Applying their fuzzing tool, the Orange Labs vulnerability research team found
499 another two DoS vulnerabilities, one in the rather old ASN.1 parser of Relative
500 Distinguished Names (RDNs) and a second one in the conversion of ASN.1 UTCTIME
501 and GENERALIZEDTIME strings to a time_t value.
507 - The nm plugin now passes DNS/NBNS server information to NetworkManager,
508 allowing a gateway administrator to set DNS/NBNS configuration on clients
511 - The nm plugin also accepts CA certificates for gateway authentication. If
512 a CA certificate is configured, strongSwan uses the entered gateway address
513 as its idenitity, requiring the gateways certificate to contain the same as
514 subjectAltName. This allows a gateway administrator to deploy the same
515 certificates to Windows 7 and NetworkManager clients.
517 - The command ipsec purgeike deletes IKEv2 SAs that don't have a CHILD SA.
518 The command ipsec down <conn>{n} deletes CHILD SA instance n of connection
519 <conn> whereas ipsec down <conn>{*} deletes all CHILD SA instances.
520 The command ipsec down <conn>[n] deletes IKE SA instance n of connection
521 <conn> plus dependent CHILD SAs whereas ipsec down <conn>[*] deletes all
522 IKE SA instances of connection <conn>.
524 - Fixed a regression introduced in 4.3.0 where EAP authentication calculated
525 the AUTH payload incorrectly. Further, the EAP-MSCHAPv2 MSK key derivation
526 has been updated to be compatible with the Windows 7 Release Candidate.
528 - Refactored installation of triggering policies. Routed policies are handled
529 outside of IKE_SAs to keep them installed in any case. A tunnel gets
530 established only once, even if initiation is delayed due network outages.
532 - Improved the handling of multiple acquire signals triggered by the kernel.
534 - Fixed two DoS vulnerabilities in the charon daemon that were discovered by
535 fuzzing techniques: 1) Sending a malformed IKE_SA_INIT request leaved an
536 incomplete state which caused a null pointer dereference if a subsequent
537 CREATE_CHILD_SA request was sent. 2) Sending an IKE_AUTH request with either
538 a missing TSi or TSr payload caused a null pointer derefence because the
539 checks for TSi and TSr were interchanged. The IKEv2 fuzzer used was
540 developed by the Orange Labs vulnerability research team. The tool was
541 initially written by Gabriel Campana and is now maintained by Laurent Butti.
543 - Added support for AES counter mode in ESP in IKEv2 using the proposal
544 keywords aes128ctr, aes192ctr and aes256ctr.
546 - Further progress in refactoring pluto: Use of the curl and ldap plugins
547 for fetching crls and OCSP. Use of the random plugin to get keying material
548 from /dev/random or /dev/urandom. Use of the openssl plugin as an alternative
549 to the aes, des, sha1, sha2, and md5 plugins. The blowfish, twofish, and
550 serpent encryption plugins are now optional and are not enabled by default.
556 - Support for the IKEv2 Multiple Authentication Exchanges extension (RFC4739).
557 Initiators and responders can use several authentication rounds (e.g. RSA
558 followed by EAP) to authenticate. The new ipsec.conf leftauth/rightauth and
559 leftauth2/rightauth2 parameters define own authentication rounds or setup
560 constraints for the remote peer. See the ipsec.conf man page for more detials.
562 - If glibc printf hooks (register_printf_function) are not available,
563 strongSwan can use the vstr string library to run on non-glibc systems.
565 - The IKEv2 charon daemon can now configure the ESP CAMELLIA-CBC cipher
566 (esp=camellia128|192|256).
568 - Refactored the pluto and scepclient code to use basic functions (memory
569 allocation, leak detective, chunk handling, printf_hooks, strongswan.conf
570 attributes, ASN.1 parser, etc.) from the libstrongswan library.
572 - Up to two DNS and WINS servers to be sent via IKEv1 ModeConfig can be
573 configured in the pluto section of strongswan.conf.
579 - The new server-side EAP RADIUS plugin (--enable-eap-radius)
580 relays EAP messages to and from a RADIUS server. Successfully
581 tested with with a freeradius server using EAP-MD5 and EAP-SIM.
583 - A vulnerability in the Dead Peer Detection (RFC 3706) code was found by
584 Gerd v. Egidy <gerd.von.egidy@intra2net.com> of Intra2net AG affecting
585 all Openswan and strongSwan releases. A malicious (or expired ISAKMP)
586 R_U_THERE or R_U_THERE_ACK Dead Peer Detection packet can cause the
587 pluto IKE daemon to crash and restart. No authentication or encryption
588 is required to trigger this bug. One spoofed UDP packet can cause the
589 pluto IKE daemon to restart and be unresponsive for a few seconds while
590 restarting. This DPD null state vulnerability has been officially
591 registered as CVE-2009-0790 and is fixed by this release.
593 - ASN.1 to time_t conversion caused a time wrap-around for
594 dates after Jan 18 03:14:07 UTC 2038 on 32-bit platforms.
595 As a workaround such dates are set to the maximum representable
596 time, i.e. Jan 19 03:14:07 UTC 2038.
598 - Distinguished Names containing wildcards (*) are not sent in the
605 - Fixed a use-after-free bug in the DPD timeout section of the
606 IKEv1 pluto daemon which sporadically caused a segfault.
608 - Fixed a crash in the IKEv2 charon daemon occurring with
609 mixed RAM-based and SQL-based virtual IP address pools.
611 - Fixed ASN.1 parsing of algorithmIdentifier objects where the
612 parameters field is optional.
614 - Ported nm plugin to NetworkManager 7.1.
620 - Support of the EAP-MSCHAPv2 protocol enabled by the option
621 --enable-eap-mschapv2. Requires the MD4 hash algorithm enabled
622 either by --enable-md4 or --enable-openssl.
624 - Assignment of up to two DNS and up to two WINS servers to peers via
625 the IKEv2 Configuration Payload (CP). The IPv4 or IPv6 nameserver
626 addresses are defined in strongswan.conf.
628 - The strongSwan applet for the Gnome NetworkManager is now built and
629 distributed as a separate tarball under the name NetworkManager-strongswan.
635 - Fixed ESP NULL encryption broken by the refactoring of keymat.c.
636 Also introduced proper initialization and disposal of keying material.
638 - Fixed the missing listing of connection definitions in ipsec statusall
639 broken by an unfortunate local variable overload.
645 - Several performance improvements to handle thousands of tunnels with almost
646 linear upscaling. All relevant data structures have been replaced by faster
647 counterparts with better lookup times.
649 - Better parallelization to run charon on multiple cores. Due to improved
650 ressource locking and other optimizations the daemon can take full
651 advantage of 16 or even more cores.
653 - The load-tester plugin can use a NULL Diffie-Hellman group and simulate
654 unique identities and certificates by signing peer certificates using a CA
657 - The redesigned stroke in-memory IP pool handles leases. The "ipsec leases"
658 command queries assigned leases.
660 - Added support for smartcards in charon by using the ENGINE API provided by
661 OpenSSL, based on patches by Michael Roßberg.
663 - The Padlock plugin supports the hardware RNG found on VIA CPUs to provide a
664 reliable source of randomness.
669 - Flexible configuration of logging subsystem allowing to log to multiple
670 syslog facilities or to files using fine-grained log levels for each target.
672 - Load testing plugin to do stress testing of the IKEv2 daemon against self
673 or another host. Found and fixed issues during tests in the multi-threaded
674 use of the OpenSSL plugin.
676 - Added profiling code to synchronization primitives to find bottlenecks if
677 running on multiple cores. Found and fixed an issue where parts of the
678 Diffie-Hellman calculation acquired an exclusive lock. This greatly improves
679 parallelization to multiple cores.
681 - updown script invocation has been separated into a plugin of its own to
682 further slim down the daemon core.
684 - Separated IKE_SA/CHILD_SA key derivation process into a closed system,
685 allowing future implementations to use a secured environment in e.g. kernel
688 - The kernel interface of charon has been modularized. XFRM NETLINK (default)
689 and PFKEY (--enable-kernel-pfkey) interface plugins for the native IPsec
690 stack of the Linux 2.6 kernel as well as a PFKEY interface for the KLIPS
691 IPsec stack (--enable-kernel-klips) are provided.
693 - Basic Mobile IPv6 support has been introduced, securing Binding Update
694 messages as well as tunneled traffic between Mobile Node and Home Agent.
695 The installpolicy=no option allows peaceful cooperation with a dominant
696 mip6d daemon and the new type=transport_proxy implements the special MIPv6
697 IPsec transport proxy mode where the IKEv2 daemon uses the Care-of-Address
698 but the IPsec SA is set up for the Home Address.
700 - Implemented migration of Mobile IPv6 connections using the KMADDRESS
701 field contained in XFRM_MSG_MIGRATE messages sent by the mip6d daemon
702 via the Linux 2.6.28 (or appropriately patched) kernel.
708 - IKEv2 charon daemon supports authentication based on raw public keys
709 stored in the SQL database backend. The ipsec listpubkeys command
710 lists the available raw public keys via the stroke interface.
712 - Several MOBIKE improvements: Detect changes in NAT mappings in DPD exchanges,
713 handle events if kernel detects NAT mapping changes in UDP-encapsulated
714 ESP packets (requires kernel patch), reuse old addesses in MOBIKE updates as
715 long as possible and other fixes.
717 - Fixed a bug in addr_in_subnet() which caused insertion of wrong source
718 routes for destination subnets having netwmasks not being a multiple of 8 bits.
719 Thanks go to Wolfgang Steudel, TU Ilmenau for reporting this bug.
725 - Fixed a Denial-of-Service vulnerability where an IKE_SA_INIT message with
726 a KE payload containing zeroes only can cause a crash of the IKEv2 charon
727 daemon due to a NULL pointer returned by the mpz_export() function of the
728 GNU Multiprecision Library (GMP). Thanks go to Mu Dynamics Research Labs
729 for making us aware of this problem.
731 - The new agent plugin provides a private key implementation on top of an
734 - The NetworkManager plugin has been extended to support certificate client
735 authentication using RSA keys loaded from a file or using ssh-agent.
737 - Daemon capability dropping has been ported to libcap and must be enabled
738 explicitly --with-capabilities=libcap. Future version will support the
739 newer libcap2 library.
741 - ipsec listalgs lists the IKEv2 cryptografic algorithms registered with the
742 charon keying daemon.
748 - A NetworkManager plugin allows GUI-based configuration of road-warrior
749 clients in a simple way. It features X509 based gateway authentication
750 and EAP client authentication, tunnel setup/teardown and storing passwords
751 in the Gnome Keyring.
753 - A new EAP-GTC plugin implements draft-sheffer-ikev2-gtc-00.txt and allows
754 username/password authentication against any PAM service on the gateway.
755 The new EAP method interacts nicely with the NetworkManager plugin and allows
756 client authentication against e.g. LDAP.
758 - Improved support for the EAP-Identity method. The new ipsec.conf eap_identity
759 parameter defines an additional identity to pass to the server in EAP
762 - The "ipsec statusall" command now lists CA restrictions, EAP
763 authentication types and EAP identities.
765 - Fixed two multithreading deadlocks occurring when starting up
766 several hundred tunnels concurrently.
768 - Fixed the --enable-integrity-test configure option which
769 computes a SHA-1 checksum over the libstrongswan library.
775 - Consistent logging of IKE and CHILD SAs at the audit (AUD) level.
777 - Improved the performance of the SQL-based virtual IP address pool
778 by introducing an additional addresses table. The leases table
779 storing only history information has become optional and can be
780 disabled by setting charon.plugins.sql.lease_history = no in
783 - The XFRM_STATE_AF_UNSPEC flag added to xfrm.h allows IPv4-over-IPv6
784 and IPv6-over-IPv4 tunnels with the 2.6.26 and later Linux kernels.
786 - management of different virtual IP pools for different
787 network interfaces have become possible.
789 - fixed a bug which prevented the assignment of more than 256
790 virtual IP addresses from a pool managed by an sql database.
792 - fixed a bug which did not delete own IPCOMP SAs in the kernel.
798 - Added statistics functions to ipsec pool --status and ipsec pool --leases
799 and input validation checks to various ipsec pool commands.
801 - ipsec statusall now lists all loaded charon plugins and displays
802 the negotiated IKEv2 cipher suite proposals.
804 - The openssl plugin supports the elliptic curve Diffie-Hellman groups
805 19, 20, 21, 25, and 26.
807 - The openssl plugin supports ECDSA authentication using elliptic curve
810 - Fixed a bug in stroke which caused multiple charon threads to close
811 the file descriptors during packet transfers over the stroke socket.
813 - ESP sequence numbers are now migrated in IPsec SA updates handled by
814 MOBIKE. Works only with Linux kernels >= 2.6.17.
820 - Fixed the strongswan.conf path configuration problem that occurred when
821 --sysconfig was not set explicitly in ./configure.
823 - Fixed a number of minor bugs that where discovered during the 4th
824 IKEv2 interoperability workshop in San Antonio, TX.
830 - Plugins for libstrongswan and charon can optionally be loaded according
831 to a configuration in strongswan.conf. Most components provide a
832 "load = " option followed by a space separated list of plugins to load.
833 This allows e.g. the fallback from a hardware crypto accelerator to
834 to software-based crypto plugins.
836 - Charons SQL plugin has been extended by a virtual IP address pool.
837 Configurations with a rightsourceip=%poolname setting query a SQLite or
838 MySQL database for leases. The "ipsec pool" command helps in administrating
839 the pool database. See ipsec pool --help for the available options
841 - The Authenticated Encryption Algorithms AES-CCM-8/12/16 and AES-GCM-8/12/16
842 for ESP are now supported starting with the Linux 2.6.25 kernel. The
843 syntax is e.g. esp=aes128ccm12 or esp=aes256gcm16.
849 - Support for "Hash and URL" encoded certificate payloads has been implemented
850 in the IKEv2 daemon charon. Using the "certuribase" option of a CA section
851 allows to assign a base URL to all certificates issued by the specified CA.
852 The final URL is then built by concatenating that base and the hex encoded
853 SHA1 hash of the DER encoded certificate. Note that this feature is disabled
854 by default and must be enabled using the option "charon.hash_and_url".
856 - The IKEv2 daemon charon now supports the "uniqueids" option to close multiple
857 IKE_SAs with the same peer. The option value "keep" prefers existing
858 connection setups over new ones, where the value "replace" replaces existing
861 - The crypto factory in libstrongswan additionally supports random number
862 generators, plugins may provide other sources of randomness. The default
863 plugin reads raw random data from /dev/(u)random.
865 - Extended the credential framework by a caching option to allow plugins
866 persistent caching of fetched credentials. The "cachecrl" option has been
869 - The new trustchain verification introduced in 4.2.0 has been parallelized.
870 Threads fetching CRL or OCSP information no longer block other threads.
872 - A new IKEv2 configuration attribute framework has been introduced allowing
873 plugins to provide virtual IP addresses, and in the future, other
874 configuration attribute services (e.g. DNS/WINS servers).
876 - The stroke plugin has been extended to provide virtual IP addresses from
877 a pool defined in ipsec.conf. The "rightsourceip" parameter now accepts
878 address pools in CIDR notation (e.g. 10.1.1.0/24). The parameter also accepts
879 the value "%poolname", where "poolname" identifies a pool provided by a
882 - Fixed compilation on uClibc and a couple of other minor bugs.
884 - Set DPD defaults in ipsec starter to dpd_delay=30s and dpd_timeout=150s.
886 - The IKEv1 pluto daemon now supports the ESP encryption algorithm CAMELLIA
887 with key lengths of 128, 192, and 256 bits, as well as the authentication
888 algorithm AES_XCBC_MAC. Configuration example: esp=camellia192-aesxcbc.
894 - libstrongswan has been modularized to attach crypto algorithms,
895 credential implementations (keys, certificates) and fetchers dynamically
896 through plugins. Existing code has been ported to plugins:
897 - RSA/Diffie-Hellman implementation using the GNU Multi Precision library
898 - X509 certificate system supporting CRLs, OCSP and attribute certificates
899 - Multiple plugins providing crypto algorithms in software
900 - CURL and OpenLDAP fetcher
902 - libstrongswan gained a relational database API which uses pluggable database
903 providers. Plugins for MySQL and SQLite are available.
905 - The IKEv2 keying daemon charon is more extensible. Generic plugins may provide
906 connection configuration, credentials and EAP methods or control the daemon.
907 Existing code has been ported to plugins:
908 - EAP-AKA, EAP-SIM, EAP-MD5 and EAP-Identity
909 - stroke configuration, credential and control (compatible to pluto)
910 - XML bases management protocol to control and query the daemon
911 The following new plugins are available:
912 - An experimental SQL configuration, credential and logging plugin on
913 top of either MySQL or SQLite
914 - A unit testing plugin to run tests at daemon startup
916 - The authentication and credential framework in charon has been heavily
917 refactored to support modular credential providers, proper
918 CERTREQ/CERT payload exchanges and extensible authorization rules.
920 - The framework of strongSwan Manager has envolved to the web application
921 framework libfast (FastCGI Application Server w/ Templates) and is usable
922 by other applications.
928 - IKE rekeying in NAT situations did not inherit the NAT conditions
929 to the rekeyed IKE_SA so that the UDP encapsulation was lost with
930 the next CHILD_SA rekeying.
932 - Wrong type definition of the next_payload variable in id_payload.c
933 caused an INVALID_SYNTAX error on PowerPC platforms.
935 - Implemented IKEv2 EAP-SIM server and client test modules that use
936 triplets stored in a file. For details on the configuration see
937 the scenario 'ikev2/rw-eap-sim-rsa'.
943 - Fixed error in the ordering of the certinfo_t records in the ocsp cache that
944 caused multiple entries of the same serial number to be created.
946 - Implementation of a simple EAP-MD5 module which provides CHAP
947 authentication. This may be interesting in conjunction with certificate
948 based server authentication, as weak passwords can't be brute forced
949 (in contradiction to traditional IKEv2 PSK).
951 - A complete software based implementation of EAP-AKA, using algorithms
952 specified in 3GPP2 (S.S0055). This implementation does not use an USIM,
953 but reads the secrets from ipsec.secrets. Make sure to read eap_aka.h
956 - Support for vendor specific EAP methods using Expanded EAP types. The
957 interface to EAP modules has been slightly changed, so make sure to
958 check the changes if you're already rolling your own modules.
964 - The default _updown script now dynamically inserts and removes ip6tables
965 firewall rules if leftfirewall=yes is set in IPv6 connections. New IPv6
966 net-net and roadwarrior (PSK/RSA) scenarios for both IKEv1 and IKEV2 were
969 - Implemented RFC4478 repeated authentication to force EAP/Virtual-IP clients
970 to reestablish an IKE_SA within a given timeframe.
972 - strongSwan Manager supports configuration listing, initiation and termination
973 of IKE and CHILD_SAs.
975 - Fixes and improvements to multithreading code.
977 - IKEv2 plugins have been renamed to libcharon-* to avoid naming conflicts.
978 Make sure to remove the old plugins in $libexecdir/ipsec, otherwise they get
985 - Removed recursive pthread mutexes since uClibc doesn't support them.
991 - In NAT traversal situations and multiple queued Quick Modes,
992 those pending connections inserted by auto=start after the
993 port floating from 500 to 4500 were erronously deleted.
995 - Added a "forceencaps" connection parameter to enforce UDP encapsulation
996 to surmount restrictive firewalls. NAT detection payloads are faked to
997 simulate a NAT situation and trick the other peer into NAT mode (IKEv2 only).
999 - Preview of strongSwan Manager, a web based configuration and monitoring
1000 application. It uses a new XML control interface to query the IKEv2 daemon
1001 (see http://wiki.strongswan.org/wiki/Manager).
1003 - Experimental SQLite configuration backend which will provide the configuration
1004 interface for strongSwan Manager in future releases.
1006 - Further improvements to MOBIKE support.
1012 - Since some third party IKEv2 implementations run into
1013 problems with strongSwan announcing MOBIKE capability per
1014 default, MOBIKE can be disabled on a per-connection-basis
1015 using the mobike=no option. Whereas mobike=no disables the
1016 sending of the MOBIKE_SUPPORTED notification and the floating
1017 to UDP port 4500 with the IKE_AUTH request even if no NAT
1018 situation has been detected, strongSwan will still support
1019 MOBIKE acting as a responder.
1021 - the default ipsec routing table plus its corresponding priority
1022 used for inserting source routes has been changed from 100 to 220.
1023 It can be configured using the --with-ipsec-routing-table and
1024 --with-ipsec-routing-table-prio options.
1026 - the --enable-integrity-test configure option tests the
1027 integrity of the libstrongswan crypto code during the charon
1030 - the --disable-xauth-vid configure option disables the sending
1031 of the XAUTH vendor ID. This can be used as a workaround when
1032 interoperating with some Windows VPN clients that get into
1033 trouble upon reception of an XAUTH VID without eXtended
1034 AUTHentication having been configured.
1036 - ipsec stroke now supports the rereadsecrets, rereadaacerts,
1037 rereadacerts, and listacerts options.
1043 - If a DNS lookup failure occurs when resolving right=%<FQDN>
1044 or right=<FQDN> combined with rightallowany=yes then the
1045 connection is not updated by ipsec starter thus preventing
1046 the disruption of an active IPsec connection. Only if the DNS
1047 lookup successfully returns with a changed IP address the
1048 corresponding connection definition is updated.
1050 - Routes installed by the keying daemons are now in a separate
1051 routing table with the ID 100 to avoid conflicts with the main
1052 table. Route lookup for IKEv2 traffic is done in userspace to ignore
1053 routes installed for IPsec, as IKE traffic shouldn't get encapsulated.
1059 - The pluto IKEv1 daemon now exhibits the same behaviour as its
1060 IKEv2 companion charon by inserting an explicit route via the
1061 _updown script only if a sourceip exists. This is admissible
1062 since routing through the IPsec tunnel is handled automatically
1063 by NETKEY's IPsec policies. As a consequence the left|rightnexthop
1064 parameter is not required any more.
1066 - The new IKEv1 parameter right|leftallowany parameters helps to handle
1067 the case where both peers possess dynamic IP addresses that are
1068 usually resolved using DynDNS or a similar service. The configuration
1073 can be used by the initiator to start up a connection to a peer
1074 by resolving peer.foo.bar into the currently allocated IP address.
1075 Thanks to the rightallowany flag the connection behaves later on
1080 so that the peer can rekey the connection as an initiator when his
1081 IP address changes. An alternative notation is
1085 which will implicitly set rightallowany=yes.
1087 - ipsec starter now fails more gracefully in the presence of parsing
1088 errors. Flawed ca and conn section are discarded and pluto is started
1089 if non-fatal errors only were encountered. If right=%peer.foo.bar
1090 cannot be resolved by DNS then right=%any will be used so that passive
1091 connections as a responder are still possible.
1093 - The new pkcs11initargs parameter that can be placed in the
1094 setup config section of /etc/ipsec.conf allows the definition
1095 of an argument string that is used with the PKCS#11 C_Initialize()
1096 function. This non-standard feature is required by the NSS softoken
1097 library. This patch was contributed by Robert Varga.
1099 - Fixed a bug in ipsec starter introduced by strongswan-2.8.5
1100 which caused a segmentation fault in the presence of unknown
1101 or misspelt keywords in ipsec.conf. This bug fix was contributed
1104 - Partial support for MOBIKE in IKEv2. The initiator acts on interface/
1105 address configuration changes and updates IKE and IPsec SAs dynamically.
1111 - IKEv2 peer configuration selection now can be based on a given
1112 certification authority using the rightca= statement.
1114 - IKEv2 authentication based on RSA signatures now can handle multiple
1115 certificates issued for a given peer ID. This allows a smooth transition
1116 in the case of a peer certificate renewal.
1118 - IKEv2: Support for requesting a specific virtual IP using leftsourceip on the
1119 client and returning requested virtual IPs using rightsourceip=%config
1120 on the server. If the server does not support configuration payloads, the
1121 client enforces its leftsourceip parameter.
1123 - The ./configure options --with-uid/--with-gid allow pluto and charon
1124 to drop their privileges to a minimum and change to an other UID/GID. This
1125 improves the systems security, as a possible intruder may only get the
1126 CAP_NET_ADMIN capability.
1128 - Further modularization of charon: Pluggable control interface and
1129 configuration backend modules provide extensibility. The control interface
1130 for stroke is included, and further interfaces using DBUS (NetworkManager)
1131 or XML are on the way. A backend for storing configurations in the daemon
1132 is provided and more advanced backends (using e.g. a database) are trivial
1135 - Fixed a compilation failure in libfreeswan occurring with Linux kernel
1142 - Support for an additional Diffie-Hellman exchange when creating/rekeying
1143 a CHILD_SA in IKEv2 (PFS). PFS is enabled when the proposal contains a
1144 DH group (e.g. "esp=aes128-sha1-modp1536"). Further, DH group negotiation
1145 is implemented properly for rekeying.
1147 - Support for the AES-XCBC-96 MAC algorithm for IPsec SAs when using IKEv2
1148 (requires linux >= 2.6.20). It is enabled using e.g. "esp=aes256-aesxcbc".
1150 - Working IPv4-in-IPv6 and IPv6-in-IPv4 tunnels for linux >= 2.6.21.
1152 - Added support for EAP modules which do not establish an MSK.
1154 - Removed the dependencies from the /usr/include/linux/ headers by
1155 including xfrm.h, ipsec.h, and pfkeyv2.h in the distribution.
1157 - crlNumber is now listed by ipsec listcrls
1159 - The xauth_modules.verify_secret() function now passes the
1166 - Server side cookie support. If to may IKE_SAs are in CONNECTING state,
1167 cookies are enabled and protect against DoS attacks with faked source
1168 addresses. Number of IKE_SAs in CONNECTING state is also limited per
1169 peer address to avoid resource exhaustion. IKE_SA_INIT messages are
1170 compared to properly detect retransmissions and incoming retransmits are
1171 detected even if the IKE_SA is blocked (e.g. doing OCSP fetches).
1173 - The IKEv2 daemon charon now supports dynamic http- and ldap-based CRL
1174 fetching enabled by crlcheckinterval > 0 and caching fetched CRLs
1175 enabled by cachecrls=yes.
1177 - Added the configuration options --enable-nat-transport which enables
1178 the potentially insecure NAT traversal for IPsec transport mode and
1179 --disable-vendor-id which disables the sending of the strongSwan
1182 - Fixed a long-standing bug in the pluto IKEv1 daemon which caused
1183 a segmentation fault if a malformed payload was detected in the
1184 IKE MR2 message and pluto tried to send an encrypted notification
1187 - Added the NATT_IETF_02_N Vendor ID in order to support IKEv1 connections
1188 with Windows 2003 Server which uses a wrong VID hash.
1194 - Support of SHA2_384 hash function for protecting IKEv1
1195 negotiations and support of SHA2 signatures in X.509 certificates.
1197 - Fixed a serious bug in the computation of the SHA2-512 HMAC
1198 function. Introduced automatic self-test of all IKEv1 hash
1199 and hmac functions during pluto startup. Failure of a self-test
1200 currently issues a warning only but does not exit pluto [yet].
1202 - Support for SHA2-256/384/512 PRF and HMAC functions in IKEv2.
1204 - Full support of CA information sections. ipsec listcainfos
1205 now shows all collected crlDistributionPoints and OCSP
1208 - Support of the Online Certificate Status Protocol (OCSP) for IKEv2.
1209 This feature requires the HTTP fetching capabilities of the libcurl
1210 library which must be enabled by setting the --enable-http configure
1213 - Refactored core of the IKEv2 message processing code, allowing better
1214 code reuse and separation.
1216 - Virtual IP support in IKEv2 using INTERNAL_IP4/6_ADDRESS configuration
1217 payload. Additionally, the INTERNAL_IP4/6_DNS attribute is interpreted
1218 by the requestor and installed in a resolv.conf file.
1220 - The IKEv2 daemon charon installs a route for each IPsec policy to use
1221 the correct source address even if an application does not explicitly
1224 - Integrated the EAP framework into charon which loads pluggable EAP library
1225 modules. The ipsec.conf parameter authby=eap initiates EAP authentication
1226 on the client side, while the "eap" parameter on the server side defines
1227 the EAP method to use for client authentication.
1228 A generic client side EAP-Identity module and an EAP-SIM authentication
1229 module using a third party card reader implementation are included.
1231 - Added client side support for cookies.
1233 - Integrated the fixes done at the IKEv2 interoperability bakeoff, including
1234 strict payload order, correct INVALID_KE_PAYLOAD rejection and other minor
1235 fixes to enhance interoperability with other implementations.
1241 - strongSwan now interoperates with the NCP Secure Entry Client,
1242 the Shrew Soft VPN Client, and the Cisco VPN client, doing both
1243 XAUTH and Mode Config.
1245 - UNITY attributes are now recognized and UNITY_BANNER is set
1246 to a default string.
1252 - IKEv1: Support for extended authentication (XAUTH) in combination
1253 with ISAKMP Main Mode RSA or PSK authentication. Both client and
1254 server side were implemented. Handling of user credentials can
1255 be done by a run-time loadable XAUTH module. By default user
1256 credentials are stored in ipsec.secrets.
1258 - IKEv2: Support for reauthentication when rekeying
1260 - IKEv2: Support for transport mode
1262 - fixed a lot of bugs related to byte order
1264 - various other bugfixes
1270 - IKEv1: Implementation of ModeConfig push mode via the new connection
1271 keyword modeconfig=push allows interoperability with Cisco VPN gateways.
1273 - IKEv1: The command ipsec statusall now shows "DPD active" for all
1274 ISAKMP SAs that are under active Dead Peer Detection control.
1276 - IKEv2: Charon's logging and debugging framework has been completely rewritten.
1277 Instead of logger, special printf() functions are used to directly
1278 print objects like hosts (%H) identifications (%D), certificates (%Q),
1279 etc. The number of debugging levels have been reduced to:
1281 0 (audit), 1 (control), 2 (controlmore), 3 (raw), 4 (private)
1283 The debugging levels can either be specified statically in ipsec.conf as
1286 charondebug="lib 1, cfg 3, net 2"
1288 or changed at runtime via stroke as
1290 ipsec stroke loglevel cfg 2
1296 - Implemented full support for IPv6-in-IPv6 tunnels.
1298 - Added configuration options for dead peer detection in IKEv2. dpd_action
1299 types "clear", "hold" and "restart" are supported. The dpd_timeout
1300 value is not used, as the normal retransmission policy applies to
1301 detect dead peers. The dpd_delay parameter enables sending of empty
1302 informational message to detect dead peers in case of inactivity.
1304 - Added support for preshared keys in IKEv2. PSK keys configured in
1305 ipsec.secrets are loaded. The authby parameter specifies the authentication
1306 method to authentificate ourself, the other peer may use PSK or RSA.
1308 - Changed retransmission policy to respect the keyingtries parameter.
1310 - Added private key decryption. PEM keys encrypted with AES-128/192/256
1311 or 3DES are supported.
1313 - Implemented DES/3DES algorithms in libstrongswan. 3DES can be used to
1314 encrypt IKE traffic.
1316 - Implemented SHA-256/384/512 in libstrongswan, allows usage of certificates
1317 signed with such a hash algorithm.
1319 - Added initial support for updown scripts. The actions up-host/client and
1320 down-host/client are executed. The leftfirewall=yes parameter
1321 uses the default updown script to insert dynamic firewall rules, a custom
1322 updown script may be specified with the leftupdown parameter.
1328 - Added support for the auto=route ipsec.conf parameter and the
1329 ipsec route/unroute commands for IKEv2. This allows to set up IKE_SAs and
1330 CHILD_SAs dynamically on demand when traffic is detected by the
1333 - Added support for rekeying IKE_SAs in IKEv2 using the ikelifetime parameter.
1334 As specified in IKEv2, no reauthentication is done (unlike in IKEv1), only
1335 new keys are generated using perfect forward secrecy. An optional flag
1336 which enforces reauthentication will be implemented later.
1338 - "sha" and "sha1" are now treated as synonyms in the ike= and esp=
1339 algorithm configuration statements.
1345 - Full X.509 certificate trust chain verification has been implemented.
1346 End entity certificates can be exchanged via CERT payloads. The current
1347 default is leftsendcert=always, since CERTREQ payloads are not supported
1348 yet. Optional CRLs must be imported locally into /etc/ipsec.d/crls.
1350 - Added support for leftprotoport/rightprotoport parameters in IKEv2. IKEv2
1351 would offer more possibilities for traffic selection, but the Linux kernel
1352 currently does not support it. That's why we stick with these simple
1353 ipsec.conf rules for now.
1355 - Added Dead Peer Detection (DPD) which checks liveliness of remote peer if no
1356 IKE or ESP traffic is received. DPD is currently hardcoded (dpdaction=clear,
1359 - Initial NAT traversal support in IKEv2. Charon includes NAT detection
1360 notify payloads to detect NAT routers between the peers. It switches
1361 to port 4500, uses UDP encapsulated ESP packets, handles peer address
1362 changes gracefully and sends keep alive message periodically.
1364 - Reimplemented IKE_SA state machine for charon, which allows simultaneous
1365 rekeying, more shared code, cleaner design, proper retransmission
1366 and a more extensible code base.
1368 - The mixed PSK/RSA roadwarrior detection capability introduced by the
1369 strongswan-2.7.0 release necessitated the pre-parsing of the IKE proposal
1370 payloads by the responder right before any defined IKE Main Mode state had
1371 been established. Although any form of bad proposal syntax was being correctly
1372 detected by the payload parser, the subsequent error handler didn't check
1373 the state pointer before logging current state information, causing an
1374 immediate crash of the pluto keying daemon due to a NULL pointer.
1380 - Added algorithm selection to charon: New default algorithms for
1381 ike=aes128-sha-modp2048, as both daemons support it. The default
1382 for IPsec SAs is now esp=aes128-sha,3des-md5. charon handles
1383 the ike/esp parameter the same way as pluto. As this syntax does
1384 not allow specification of a pseudo random function, the same
1385 algorithm as for integrity is used (currently sha/md5). Supported
1387 Encryption: aes128, aes192, aes256
1388 Integrity/PRF: md5, sha (using hmac)
1389 DH-Groups: modp768, 1024, 1536, 2048, 4096, 8192
1391 Encryption: aes128, aes192, aes256, 3des, blowfish128,
1392 blowfish192, blowfish256
1393 Integrity: md5, sha1
1394 More IKE encryption algorithms will come after porting libcrypto into
1397 - initial support for rekeying CHILD_SAs using IKEv2. Currently no
1398 perfect forward secrecy is used. The rekeying parameters rekey,
1399 rekeymargin, rekeyfuzz and keylife from ipsec.conf are now supported
1400 when using IKEv2. WARNING: charon currently is unable to handle
1401 simultaneous rekeying. To avoid such a situation, use a large
1402 rekeyfuzz, or even better, set rekey=no on one peer.
1404 - support for host2host, net2net, host2net (roadwarrior) tunnels
1405 using predefined RSA certificates (see uml scenarios for
1406 configuration examples).
1408 - new build environment featuring autotools. Features such
1409 as HTTP, LDAP and smartcard support may be enabled using
1410 the ./configure script. Changing install directories
1411 is possible, too. See ./configure --help for more details.
1413 - better integration of charon with ipsec starter, which allows
1414 (almost) transparent operation with both daemons. charon
1415 handles ipsec commands up, down, status, statusall, listall,
1416 listcerts and allows proper load, reload and delete of connections
1423 - initial support of the IKEv2 protocol. Connections in
1424 ipsec.conf designated by keyexchange=ikev2 are negotiated
1425 by the new IKEv2 charon keying daemon whereas those marked
1426 by keyexchange=ikev1 or the default keyexchange=ike are
1427 handled thy the IKEv1 pluto keying daemon. Currently only
1428 a limited subset of functions are available with IKEv2
1429 (Default AES encryption, authentication based on locally
1430 imported X.509 certificates, unencrypted private RSA keys
1431 in PKCS#1 file format, limited functionality of the ipsec
1438 - the dynamic iptables rules from the _updown_x509 template
1439 for KLIPS and the _updown_policy template for NETKEY have
1440 been merged into the default _updown script. The existing
1441 left|rightfirewall keyword causes the automatic insertion
1442 and deletion of ACCEPT rules for tunneled traffic upon
1443 the successful setup and teardown of an IPsec SA, respectively.
1444 left|rightfirwall can be used with KLIPS under any Linux 2.4
1445 kernel or with NETKEY under a Linux kernel version >= 2.6.16
1446 in conjunction with iptables >= 1.3.5. For NETKEY under a Linux
1447 kernel version < 2.6.16 which does not support IPsec policy
1448 matching yet, please continue to use a copy of the _updown_espmark
1449 template loaded via the left|rightupdown keyword.
1451 - a new left|righthostaccess keyword has been introduced which
1452 can be used in conjunction with left|rightfirewall and the
1453 default _updown script. By default leftfirewall=yes inserts
1454 a bi-directional iptables FORWARD rule for a local client network
1455 with a netmask different from 255.255.255.255 (single host).
1456 This does not allow to access the VPN gateway host via its
1457 internal network interface which is part of the client subnet
1458 because an iptables INPUT and OUTPUT rule would be required.
1459 lefthostaccess=yes will cause this additional ACCEPT rules to
1462 - mixed PSK|RSA roadwarriors are now supported. The ISAKMP proposal
1463 payload is preparsed in order to find out whether the roadwarrior
1464 requests PSK or RSA so that a matching connection candidate can
1471 - the new _updown_policy template allows ipsec policy based
1472 iptables firewall rules. Required are iptables version
1473 >= 1.3.5 and linux kernel >= 2.6.16. This script obsoletes
1474 the _updown_espmark template, so that no INPUT mangle rules
1475 are required any more.
1477 - added support of DPD restart mode
1479 - ipsec starter now allows the use of wildcards in include
1480 statements as e.g. in "include /etc/my_ipsec/*.conf".
1481 Patch courtesy of Matthias Haas.
1483 - the Netscape OID 'employeeNumber' is now recognized and can be
1484 used as a Relative Distinguished Name in certificates.
1490 - /etc/init.d/ipsec or /etc/rc.d/ipsec is now a copy of the ipsec
1491 command and not of ipsec setup any more.
1493 - ipsec starter now supports AH authentication in conjunction with
1494 ESP encryption. AH authentication is configured in ipsec.conf
1495 via the auth=ah parameter.
1497 - The command ipsec scencrypt|scdecrypt <args> is now an alias for
1498 ipsec whack --scencrypt|scdecrypt <args>.
1500 - get_sa_info() now determines for the native netkey IPsec stack
1501 the exact time of the last use of an active eroute. This information
1502 is used by the Dead Peer Detection algorithm and is also displayed by
1503 the ipsec status command.
1509 - running under the native Linux 2.6 IPsec stack, the function
1510 get_sa_info() is called by ipsec auto --status to display the current
1511 number of transmitted bytes per IPsec SA.
1513 - get_sa_info() is also used by the Dead Peer Detection process to detect
1514 recent ESP activity. If ESP traffic was received from the peer within
1515 the last dpd_delay interval then no R_Y_THERE notification must be sent.
1517 - strongSwan now supports the Relative Distinguished Name "unstructuredName"
1518 in ID_DER_ASN1_DN identities. The following notations are possible:
1520 rightid="unstructuredName=John Doe"
1521 rightid="UN=John Doe"
1523 - fixed a long-standing bug which caused PSK-based roadwarrior connections
1524 to segfault in the function id.c:same_id() called by keys.c:get_secret()
1525 if an FQDN, USER_FQDN, or Key ID was defined, as in the following example.
1532 - the ipsec command now supports most ipsec auto commands (e.g. ipsec listall).
1534 - ipsec starter didn't set host_addr and client.addr ports in whack msg.
1536 - in order to guarantee backwards-compatibility with the script-based
1537 auto function (e.g. auto --replace), the ipsec starter scripts stores
1538 the defaultroute information in the temporary file /var/run/ipsec.info.
1540 - The compile-time option USE_XAUTH_VID enables the sending of the XAUTH
1541 Vendor ID which is expected by Cisco PIX 7 boxes that act as IKE Mode Config
1544 - the ipsec starter now also recognizes the parameters authby=never and
1545 type=passthrough|pass|drop|reject.
1551 - ipsec starter now supports the also parameter which allows
1552 a modular structure of the connection definitions. Thus
1553 "ipsec start" is now ready to replace "ipsec setup".
1559 - Mathieu Lafon's popular ipsec starter tool has been added to the
1560 strongSwan distribution. Many thanks go to Stephan Scholz from astaro
1561 for his integration work. ipsec starter is a C program which is going
1562 to replace the various shell and awk starter scripts (setup, _plutoload,
1563 _plutostart, _realsetup, _startklips, _confread, and auto). Since
1564 ipsec.conf is now parsed only once, the starting of multiple tunnels is
1565 accelerated tremedously.
1567 - Added support of %defaultroute to the ipsec starter. If the IP address
1568 changes, a HUP signal to the ipsec starter will automatically
1569 reload pluto's connections.
1571 - moved most compile time configurations from pluto/Makefile to
1572 Makefile.inc by defining the options USE_LIBCURL, USE_LDAP,
1573 USE_SMARTCARD, and USE_NAT_TRAVERSAL_TRANSPORT_MODE.
1575 - removed the ipsec verify and ipsec newhostkey commands
1577 - fixed some 64-bit issues in formatted print statements
1579 - The scepclient functionality implementing the Simple Certificate
1580 Enrollment Protocol (SCEP) is nearly complete but hasn't been
1587 - CA certicates are now automatically loaded from a smartcard
1588 or USB crypto token and appear in the ipsec auto --listcacerts
1595 - when using "ipsec whack --scencrypt <data>" with a PKCS#11
1596 library that does not support the C_Encrypt() Cryptoki
1597 function (e.g. OpenSC), the RSA encryption is done in
1598 software using the public key fetched from the smartcard.
1600 - The scepclient function now allows to define the
1601 validity of a self-signed certificate using the --days,
1602 --startdate, and --enddate options. The default validity
1603 has been changed from one year to five years.
1609 - the config setup parameter pkcs11proxy=yes opens pluto's PKCS#11
1610 interface to other applications for RSA encryption and decryption
1611 via the whack interface. Notation:
1613 ipsec whack --scencrypt <data>
1614 [--inbase 16|hex|64|base64|256|text|ascii]
1615 [--outbase 16|hex|64|base64|256|text|ascii]
1618 ipsec whack --scdecrypt <data>
1619 [--inbase 16|hex|64|base64|256|text|ascii]
1620 [--outbase 16|hex|64|base64|256|text|ascii]
1623 The default setting for inbase and outbase is hex.
1625 The new proxy interface can be used for securing symmetric
1626 encryption keys required by the cryptoloop or dm-crypt
1627 disk encryption schemes, especially in the case when
1628 pkcs11keepstate=yes causes pluto to lock the pkcs11 slot
1631 - if the file /etc/ipsec.secrets is lacking during the startup of
1632 pluto then the root-readable file /etc/ipsec.d/private/myKey.der
1633 containing a 2048 bit RSA private key and a matching self-signed
1634 certificate stored in the file /etc/ipsec.d/certs/selfCert.der
1635 is automatically generated by calling the function
1637 ipsec scepclient --out pkcs1 --out cert-self
1639 scepclient was written by Jan Hutter and Martin Willi, students
1640 at the University of Applied Sciences in Rapperswil, Switzerland.
1646 - the current extension of the PKCS#7 framework introduced
1647 a parsing error in PKCS#7 wrapped X.509 certificates that are
1648 e.g. transmitted by Windows XP when multi-level CAs are used.
1649 the parsing syntax has been fixed.
1651 - added a patch by Gerald Richter which tolerates multiple occurrences
1652 of the ipsec0 interface when using KLIPS.
1658 - with gawk-3.1.4 the word "default2 has become a protected
1659 keyword for use in switch statements and cannot be used any
1660 more in the strongSwan scripts. This problem has been
1661 solved by renaming "default" to "defaults" and "setdefault"
1662 in the scripts _confread and auto, respectively.
1664 - introduced the parameter leftsendcert with the values
1666 always|yes (the default, always send a cert)
1667 ifasked (send the cert only upon a cert request)
1668 never|no (never send a cert, used for raw RSA keys and
1671 - fixed the initialization of the ESP key length to a default of
1672 128 bits in the case that the peer does not send a key length
1673 attribute for AES encryption.
1675 - applied Herbert Xu's uniqueIDs patch
1677 - applied Herbert Xu's CLOEXEC patches
1683 - CRLs can now be cached also in the case when the issuer's
1684 certificate does not contain a subjectKeyIdentifier field.
1685 In that case the subjectKeyIdentifier is computed by pluto as the
1686 160 bit SHA-1 hash of the issuer's public key in compliance
1687 with section 4.2.1.2 of RFC 3280.
1689 - Fixed a bug introduced by strongswan-2.5.1 which eliminated
1690 not only multiple Quick Modes of a given connection but also
1691 multiple connections between two security gateways.
1697 - Under the native IPsec of the Linux 2.6 kernel, a %trap eroute
1698 installed either by setting auto=route in ipsec.conf or by
1699 a connection put into hold, generates an XFRM_AQUIRE event
1700 for each packet that wants to use the not-yet exisiting
1701 tunnel. Up to now each XFRM_AQUIRE event led to an entry in
1702 the Quick Mode queue, causing multiple IPsec SA to be
1703 established in rapid succession. Starting with strongswan-2.5.1
1704 only a single IPsec SA is established per host-pair connection.
1706 - Right after loading the PKCS#11 module, all smartcard slots are
1707 searched for certificates. The result can be viewed using
1710 ipsec auto --listcards
1712 The certificate objects found in the slots are numbered
1713 starting with #1, #2, etc. This position number can be used to address
1714 certificates (leftcert=%smartcard) and keys (: PIN %smartcard)
1715 in ipsec.conf and ipsec.secrets, respectively:
1717 %smartcard (selects object #1)
1718 %smartcard#1 (selects object #1)
1719 %smartcard#3 (selects object #3)
1721 As an alternative the existing retrieval scheme can be used:
1723 %smartcard:45 (selects object with id=45)
1724 %smartcard0 (selects first object in slot 0)
1725 %smartcard4:45 (selects object in slot 4 with id=45)
1727 - Depending on the settings of CKA_SIGN and CKA_DECRYPT
1728 private key flags either C_Sign() or C_Decrypt() is used
1729 to generate a signature.
1731 - The output buffer length parameter siglen in C_Sign()
1732 is now initialized to the actual size of the output
1733 buffer prior to the function call. This fixes the
1734 CKR_BUFFER_TOO_SMALL error that could occur when using
1735 the OpenSC PKCS#11 module.
1737 - Changed the initialization of the PKCS#11 CK_MECHANISM in
1738 C_SignInit() to mech = { CKM_RSA_PKCS, NULL_PTR, 0 }.
1740 - Refactored the RSA public/private key code and transferred it
1741 from keys.c to the new pkcs1.c file as a preparatory step
1742 towards the release of the SCEP client.
1748 - The loading of a PKCS#11 smartcard library module during
1749 runtime does not require OpenSC library functions any more
1750 because the corresponding code has been integrated into
1751 smartcard.c. Also the RSAREF pkcs11 header files have been
1752 included in a newly created pluto/rsaref directory so that
1753 no external include path has to be defined any longer.
1755 - A long-awaited feature has been implemented at last:
1756 The local caching of CRLs fetched via HTTP or LDAP, activated
1757 by the parameter cachecrls=yes in the config setup section
1758 of ipsec.conf. The dynamically fetched CRLs are stored under
1759 a unique file name containing the issuer's subjectKeyID
1760 in /etc/ipsec.d/crls.
1762 - Applied a one-line patch courtesy of Michael Richardson
1763 from the Openswan project which fixes the kernel-oops
1764 in KLIPS when an snmp daemon is running on the same box.
1770 - Eliminated null length CRL distribution point strings.
1772 - Fixed a trust path evaluation bug introduced with 2.4.3
1778 - Improved the joint OCSP / CRL revocation policy.
1779 OCSP responses have precedence over CRL entries.
1781 - Introduced support of CRLv2 reason codes.
1783 - Fixed a bug with key-pad equipped readers which caused
1784 pluto to prompt for the pin via the console when the first
1785 occasion to enter the pin via the key-pad was missed.
1787 - When pluto is built with LDAP_V3 enabled, the library
1788 liblber required by newer versions of openldap is now
1795 - Added the _updown_espmark template which requires all
1796 incoming ESP traffic to be marked with a default mark
1799 - Introduced the pkcs11keepstate parameter in the config setup
1800 section of ipsec.conf. With pkcs11keepstate=yes the PKCS#11
1801 session and login states are kept as long as possible during
1802 the lifetime of pluto. This means that a PIN entry via a key
1803 pad has to be done only once.
1805 - Introduced the pkcs11module parameter in the config setup
1806 section of ipsec.conf which specifies the PKCS#11 module
1807 to be used with smart cards. Example:
1809 pkcs11module=/usr/lib/pkcs11/opensc-pkcs11.lo
1811 - Added support of smartcard readers equipped with a PIN pad.
1813 - Added patch by Jay Pfeifer which detects when netkey
1814 modules have been statically built into the Linux 2.6 kernel.
1816 - Added two patches by Herbert Xu. The first uses ip xfrm
1817 instead of setkey to flush the IPsec policy database. The
1818 second sets the optional flag in inbound IPComp SAs only.
1820 - Applied Ulrich Weber's patch which fixes an interoperability
1821 problem between native IPsec and KLIPS systems caused by
1822 setting the replay window to 32 instead of 0 for ipcomp.
1828 - Fixed a bug which caused an unwanted Mode Config request
1829 to be initiated in the case where "right" was used to denote
1830 the local side in ipsec.conf and "left" the remote side,
1831 contrary to the recommendation that "right" be remote and
1838 - updated Vendor ID to strongSwan-2.4.0
1840 - updated copyright statement to include David Buechi and
1847 - strongSwan now communicates with attached smartcards and
1848 USB crypto tokens via the standardized PKCS #11 interface.
1849 By default the OpenSC library from www.opensc.org is used
1850 but any other PKCS#11 library could be dynamically linked.
1851 strongSwan's PKCS#11 API was implemented by David Buechi
1852 and Michael Meier, both graduates of the Zurich University
1853 of Applied Sciences in Winterthur, Switzerland.
1855 - When a %trap eroute is triggered by an outgoing IP packet
1856 then the native IPsec stack of the Linux 2.6 kernel [often/
1857 always?] returns an XFRM_ACQUIRE message with an undefined
1858 protocol family field and the connection setup fails.
1859 As a workaround IPv4 (AF_INET) is now assumed.
1861 - the results of the UML test scenarios are now enhanced
1862 with block diagrams of the virtual network topology used
1863 in a particular test.
1869 - fixed IV used to decrypt informational messages.
1870 This bug was introduced with Mode Config functionality.
1872 - fixed NCP Vendor ID.
1874 - undid one of Ulrich Weber's maximum udp size patches
1875 because it caused a segmentation fault with NAT-ed
1878 - added UML scenarios wildcards and attr-cert which
1879 demonstrate the implementation of IPsec policies based
1880 on wildcard parameters contained in Distinguished Names and
1881 on X.509 attribute certificates, respectively.
1887 - Added basic Mode Config functionality
1889 - Added Mathieu Lafon's patch which upgrades the status of
1890 the NAT-Traversal implementation to RFC 3947.
1892 - The _startklips script now also loads the xfrm4_tunnel
1895 - Added Ulrich Weber's netlink replay window size and
1896 maximum udp size patches.
1898 - UML testing now uses the Linux 2.6.10 UML kernel by default.
1904 - Eric Marchionni and Patrik Rayo, both recent graduates from
1905 the Zuercher Hochschule Winterthur in Switzerland, created a
1906 User-Mode-Linux test setup for strongSwan. For more details
1907 please read the INSTALL and README documents in the testing
1910 - Full support of group attributes based on X.509 attribute
1911 certificates. Attribute certificates can be generated
1912 using the openac facility. For more details see
1916 The group attributes can be used in connection definitions
1917 in order to give IPsec access to specific user groups.
1918 This is done with the new parameter left|rightgroups as in
1920 rightgroups="Research, Sales"
1922 giving access to users possessing the group attributes
1923 Research or Sales, only.
1925 - In Quick Mode clients with subnet mask /32 are now
1926 coded as IP_V4_ADDRESS or IP_V6_ADDRESS. This should
1927 fix rekeying problems with the SafeNet/SoftRemote and NCP
1928 Secure Entry Clients.
1930 - Changed the defaults of the ikelifetime and keylife parameters
1931 to 3h and 1h, respectively. The maximum allowable values are
1932 now both set to 24 h.
1934 - Suppressed notification wars between two IPsec peers that
1935 could e.g. be triggered by incorrect ISAKMP encryption.
1937 - Public RSA keys can now have identical IDs if either the
1938 issuing CA or the serial number is different. The serial
1939 number of a certificate is now shown by the command
1941 ipsec auto --listpubkeys
1947 - Added Tuomo Soini's sourceip feature which allows a strongSwan
1948 roadwarrior to use a fixed Virtual IP (see README section 2.6)
1949 and reduces the well-known four tunnel case on VPN gateways to
1950 a single tunnel definition (see README section 2.4).
1952 - Fixed a bug occurring with NAT-Traversal enabled when the responder
1953 suddenly turns initiator and the initiator cannot find a matching
1954 connection because of the floated IKE port 4500.
1956 - Removed misleading ipsec verify command from barf.
1958 - Running under the native IP stack, ipsec --version now shows
1959 the Linux kernel version (courtesy to the Openswan project).
1965 - Introduced the ipsec auto --listalgs monitoring command which lists
1966 all currently registered IKE and ESP algorithms.
1968 - Fixed a bug in the ESP algorithm selection occurring when the strict flag
1969 is set and the first proposed transform does not match.
1971 - Fixed another deadlock in the use of the lock_certs_and_keys() mutex,
1972 occurring when a smartcard is present.
1974 - Prevented that a superseded Phase1 state can trigger a DPD_TIMEOUT event.
1976 - Fixed the printing of the notification names (null)
1978 - Applied another of Herbert Xu's Netlink patches.
1984 - Support of Dead Peer Detection. The connection parameter
1986 dpdaction=clear|hold
1988 activates DPD for the given connection.
1990 - The default Opportunistic Encryption (OE) policy groups are not
1991 automatically included anymore. Those wishing to activate OE can include
1992 the policy group with the following statement in ipsec.conf:
1994 include /etc/ipsec.d/examples/oe.conf
1996 The default for [right|left]rsasigkey is now set to %cert.
1998 - strongSwan now has a Vendor ID of its own which can be activated
1999 using the compile option VENDORID
2001 - Applied Herbert Xu's patch which sets the compression algorithm correctly.
2003 - Applied Herbert Xu's patch fixing an ESPINUDP problem
2005 - Applied Herbert Xu's patch setting source/destination port numbers.
2007 - Reapplied one of Herbert Xu's NAT-Traversal patches which got
2008 lost during the migration from SuperFreeS/WAN.
2010 - Fixed a deadlock in the use of the lock_certs_and_keys() mutex.
2012 - Fixed the unsharing of alg parameters when instantiating group
2019 - Thomas Walpuski made me aware of a potential DoS attack via
2020 a PKCS#7-wrapped certificate bundle which could overwrite valid CA
2021 certificates in Pluto's authority certificate store. This vulnerability
2022 was fixed by establishing trust in CA candidate certificates up to a
2023 trusted root CA prior to insertion into Pluto's chained list.
2025 - replaced the --assign option by the -v option in the auto awk script
2026 in order to make it run with mawk under debian/woody.
2032 - Split of the status information between ipsec auto --status (concise)
2033 and ipsec auto --statusall (verbose). Both commands can be used with
2034 an optional connection selector:
2036 ipsec auto --status[all] <connection_name>
2038 - Added the description of X.509 related features to the ipsec_auto(8)
2041 - Hardened the ASN.1 parser in debug mode, especially the printing
2042 of malformed distinguished names.
2044 - The size of an RSA public key received in a certificate is now restricted to
2046 512 bits <= modulus length <= 8192 bits.
2048 - Fixed the debug mode enumeration.
2054 - Fixed another PKCS#7 vulnerability which could lead to an
2055 endless loop while following the X.509 trust chain.
2061 - Fixed the PKCS#7 vulnerability discovered by Thomas Walpuski
2062 that accepted end certificates having identical issuer and subject
2063 distinguished names in a multi-tier X.509 trust chain.
2069 - Removed all remaining references to ipsec_netlink.h in KLIPS.
2075 - The new "ca" section allows to define the following parameters:
2078 cacert=koolCA.pem # cacert of kool CA
2079 ocspuri=http://ocsp.kool.net:8001 # ocsp server
2080 ldapserver=ldap.kool.net # default ldap server
2081 crluri=http://www.kool.net/kool.crl # crl distribution point
2082 crluri2="ldap:///O=Kool, C= .." # crl distribution point #2
2083 auto=add # add, ignore
2085 The ca definitions can be monitored via the command
2087 ipsec auto --listcainfos
2089 - Fixed cosmetic corruption of /proc filesystem by integrating
2090 D. Hugh Redelmeier's freeswan-2.06 kernel fixes.
2096 - Added support for the 818043 NAT-Traversal update of Microsoft's
2097 Windows 2000/XP IPsec client which sends an ID_FQDN during Quick Mode.
2099 - A symbolic link to libcrypto is now added in the kernel sources
2100 during kernel compilation
2102 - Fixed a couple of 64 bit issues (mostly casts to int).
2103 Thanks to Ken Bantoft who checked my sources on a 64 bit platform.
2105 - Replaced s[n]printf() statements in the kernel by ipsec_snprintf().
2106 Credits go to D. Hugh Redelmeier, Michael Richardson, and Sam Sgro
2107 of the FreeS/WAN team who solved this problem with the 2.4.25 kernel.
2113 - an empty ASN.1 SEQUENCE OF or SET OF object (e.g. a subjectAltName
2114 certificate extension which contains no generalName item) can cause
2115 a pluto crash. This bug has been fixed. Additionally the ASN.1 parser has
2116 been hardened to make it more robust against malformed ASN.1 objects.
2118 - applied Herbert Xu's NAT-T patches which fixes NAT-T under the native
2119 Linux 2.6 IPsec stack.
2125 - based on freeswan-2.04, x509-1.5.3, nat-0.6c, alg-0.8.1rc12
projects / strongswan.git / blob